Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 翻盖式(前插后翻) |
| Operating Temperature | -45℃~+85℃ |
| Number of Contacts | 26P |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 0.5mm |
| Description | Front insertion and back flip type -45℃~+85℃ 26P Double-Sided Contacts, Top and Bottom Entry 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | AFC24-S26FIA-HF |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | AFC24-S26FIA-HF |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Locking Feature | 翻盖式(前插后翻) | Operating Temperature | -45℃~+85℃ |
| Number of Contacts | 26P | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 0.5mm |
| Description | Front insertion and back flip type -45℃~+85℃ 26P Double-Sided Contacts, Top and Bottom Entry 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | AFC24-S26FIA-HF |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle | Model Number | AFC24-S26FIA-HF |
The AFC24-S**FIA-HF is a 0.5mm pitch FPC/FFC connector with a locking mechanism. It is designed for two-sided contact and features a front-plug, rear-flip design with a height of 2.0mm. This connector is HF (Halogen-Free) compliant.
| Item | Item | Requirement | Test Condition |
| Ratings | Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | ||
| Ambient temperature Range | -45 +85 | ||
| Electrical Performance | Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. | |
| Environmental and Others | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) | |
| Vibration | Discontinuity: 1 ms MAX. Appearance: No Damage | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. DC 1mA energized state. | |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA energized state. | |
| Heat Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | 852, 96 hours. | |
| Cold Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | -402, 96 hours. | |
| Humidity | Insulation Resistance: 20 M MIN Appearance: No Damage | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours. | |
| Temperature Cycling | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | 5 cycles of: a) -452 (30 minutes) b) 852 (30 minutes) Transition time: 10-15 minutes. | |
| Salt Spray | Contact Resistance: 60 m MAX Appearance: No Damage | 484 hours exposure to a salt spray from the 51% solution at 352. | |
| SO2 Gas | Contact Resistance: 60 m MAX Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas | Contact Resistance: 60 m MAX Appearance: No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting: 95% of wetting area | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip. | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!