Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -45℃~+85℃ |
| Number of Contacts | 24P |
| Contact Type | 上接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 0.8mm |
| Description | Slide Lock -45℃~+85℃ 24P Top Contact 0.8mm SMD,P=0.8mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | AFC08-S24ECA-00 |
| Package | SMD,P=0.8mm,Surface Mount,Right Angle |
| Model Number | AFC08-S24ECA-00 |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -45℃~+85℃ |
| Number of Contacts | 24P | Contact Type | 上接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 0.8mm |
| Description | Slide Lock -45℃~+85℃ 24P Top Contact 0.8mm SMD,P=0.8mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | AFC08-S24ECA-00 |
| Package | SMD,P=0.8mm,Surface Mount,Right Angle | Model Number | AFC08-S24ECA-00 |
The AFC08-S**ECA-00 is a 0.8mm pitch FPC/FFC connector with a top-entry, pull-tab design. It is suitable for flexible flat cable connections and is manufactured by SHENZHEN JUSHUO ELECTRONICS CO.,LTD.
| Item | Specification | Test Condition | Requirement |
| [3] RATINGS | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | [AC/DC(effective value)50Hz] | 0.5A | |
| Ambient temperature Range | -45 +85 | ||
| [4] PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | DC 1mA energizing state; vibration along XYZ three directions; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage | |
| Shock | DC 1mA energizing state; along mutually perpendicular 6 directions; impact with 490m/s2{50G}; 3 times each | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage | |
| Heat Resistance | Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Cold Resistance | Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Humidity | Mate applicable FPC/FFC; place in 402, 90-95% relative humidity air for 96 hours; then measure within 0.5 hours after returning to room temperature | Insulation Resistance: 20 M MIN; Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: -452 30 minutes; 852 30 minutes; with intermediate steps at room temperature | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Salt Spray | Mate applicable FPC/FFC; 484 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water; then dry at room temperature. | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion | |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from terminal tip. | Solder Wetting: 95% coverage | |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605. 0.2 mm from terminal tip. | Appearance: No Damage, Deformation | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!