Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -45℃~+85℃ |
| Locking Feature | 翻盖式 |
| Number of Contacts | 16P |
| Contact Type | 下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 0.5mm |
| Description | -45℃~+85℃ Hinged Lid 16P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | AFC01-S16FCA-HF |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | AFC01-S16FCA-HF |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Operating Temperature | -45℃~+85℃ | Locking Feature | 翻盖式 |
| Number of Contacts | 16P | Contact Type | 下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 0.5mm |
| Description | -45℃~+85℃ Hinged Lid 16P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | AFC01-S16FCA-HF |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle | Model Number | AFC01-S16FCA-HF |
This specification covers the 0.5mm pitch FPC/FFC connectors (series locking) with a flip-up connector type, designed for FPC/FFC applications. These connectors are HF halogen-free and offer reliable electrical and mechanical performance.
| Item | Requirement | Test Condition |
|---|---|---|
| 1. Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (virtual value) 50Hz] | |
| Ambient temperature Range | -45 +85 | |
| 2. Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 3. Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. Suitable for 0.3mm thick FFC. |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| 4. Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. No power applied. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes. DC 1mA applied. |
| Shock | Discontinuity: 1 ms MAX; Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA applied. |
| Heat Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 852, 96 hours. Mate applicable FPC/FFC. Then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | -402, 96 hours. Mate applicable FPC/FFC. Then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN; Contact Resistance: 60 m MAX; Appearance: No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Mate applicable FPC/FFC. Then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes. Transition time 10-15 minutes. Mate applicable FPC/FFC. |
| Salt Spray | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion | 484 hours exposure to a salt spray from the 51% solution at 352. Wash with room temperature water after test and dry at room temperature. Mate applicable FPC/FFC. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. Mate applicable FPC/FFC. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. Mate applicable FPC/FFC. |
| Solderability | Solder Wetting: 95% or more coverage. | Soldering Time: 20.5 sec. Soldering Temperature: 2355 at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605 at 0.2 mm from terminal tip. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!