Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 翻盖式(前插后翻) |
| Operating Temperature | -45℃~+85℃ |
| Number of Contacts | 31P |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.2mm |
| Pitch | 0.6mm |
| Description | Front insertion and back flip type -45℃~+85℃ 31P Double-Sided Contacts, Top and Bottom Entry 0.6mm SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | AFE07-S31FMA-HF |
| Package | SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) |
| Model Number | AFE07-S31FMA-HF |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Locking Feature | 翻盖式(前插后翻) | Operating Temperature | -45℃~+85℃ |
| Number of Contacts | 31P | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.2mm | Pitch | 0.6mm |
| Description | Front insertion and back flip type -45℃~+85℃ 31P Double-Sided Contacts, Top and Bottom Entry 0.6mm SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | AFE07-S31FMA-HF |
| Package | SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) | Model Number | AFE07-S31FMA-HF |
This specification covers the 0.3mm Pitch FPC/FFC Connectors (series Locking) with a height of H0.9mm. These connectors are designed for flexible flat cable applications.
| Item | Requirement | Test Condition |
| [2] Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | AFE07-S**FMA-HF | |
| Product Specification | 0.3mm Pitch Double-Sided Front-Insertion Rear-Flip FPC Connector | |
| [3] Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | |
| Ambient Temperature Range | -45 +85 | |
| [4] Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance 60 m MAX; Discontinuity 1 ms MAX; Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes; DC 1mA energizing. |
| Shock | Discontinuity 1 ms MAX; Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes; DC 1mA energizing. |
| Heat Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 852, 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | -402, 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance 20 M MIN; Appearance: No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. |
| Temperature Cycling | Contact Resistance 60 m MAX | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. |
| Salt Spray | Contact Resistance 60 m MAX; Appearance: No Damage, Corrosion | 484 hours exposure to a salt spray from the 51% solution at 352. |
| SO2 Gas | Contact Resistance 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Contact Resistance 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting 95% | Soldering Time: 20.5 sec; Soldering Temperature: 2355; 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec; Soldering Temperature: 2605; 0.2 mm from terminal tip. |
| [5] Product Shape, Dimensions and Materials | ||
| Main Body | LCP (Natural Color) UL 94V-0 | |
| Housing Lock | LCP (Black) UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with gold |
| Contact | Phosphor Bronze | Metal surface plated with gold |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!