Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -45℃~+85℃ |
| Locking Feature | 无锁 |
| Number of Contacts | 10P |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | -45℃~+85℃ Non-Latching 10P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | AFA10-S10VCA-00 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | AFA10-S10VCA-00 |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Operating Temperature | -45℃~+85℃ | Locking Feature | 无锁 |
| Number of Contacts | 10P | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | -45℃~+85℃ Non-Latching 10P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | AFA10-S10VCA-00 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | AFA10-S10VCA-00 |
This specification covers the 1.0mm Pitch FPC/FFC Connectors, specifically the AFA10-S**VCA-00 model. These connectors are designed for flexible flat cable applications, offering a double-sided connection with a solder tail and an ultra-thin profile of H2.0. They are suitable for various electronic applications requiring reliable and compact interconnect solutions.
| Item | Test Condition | Requirement |
| [3] RATINGS | ||
| Rated Voltage(MAX) | 125V | |
| Rated Current(MAX) | [AC/DC(Virtual value)50Hz] | 0.5A |
| Ambient temperature Range | -45 +85 | |
| [4] PERFORMANCE | ||
| 4.1 Electrical Performance | Contact Resistance (Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA) | 20 mMAX |
| Insulation Resistance (Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground) | 500MMIN | |
| Dielectric Strength (Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground) | No Breakdown | |
| 4.2 Mechanical Performance | Locking and Withdrawal Force (Insert and extract applicable FFC at the speed rate of 253mm/minute) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal /Housing Retention Force (Pull the terminal at the speed rate of 25 3mm per minute) | 3.92N MIN | |
| 4.3 Environmental and Others | Repeated Insertion and Withdrawal (Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute) | Contact Resistance: 60 m MAX |
| Temperature Rise (Carrying rated current load. (UL 498)) | 30 MAX | |
| Vibration (Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes DC 1mA energized) | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock (490m/s2{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA energized) | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance (852, 96 hour) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance (-402, 96 hour) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity (Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours) | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling (5 cycles of: a) -452 30 minutes b) 852 30 minutes) | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| Salt Spray (484 hours exposure to a salt spray from the 51% solution at 352) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| SO2 Gas (24 hours exposure to 505ppm. SO2 gas at 402) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas (40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution) | Contact Resistance: 60 m MAX | |
| Solder ability (Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip) | Solder Wetting: 95% or more | |
| Resistance to Soldering heat (Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip) | Appearance: No Damage, Deformation | |
| [5] PRODUCT SHAPE, DIMENSIONS AND MATERIALS (Refer to the drawing) | ||
| Main body | LCP(Natural) UL 94V-0 | |
| Housing Lock | LCP(Black) UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze | Metal Surface Gold Plated/Tinning |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!