Shenzhen ECER Network Technology Co., Ltd.
| Mounting Type | 弯插 |
| Connector Type | DC电源插座 |
| Rated current | 500mA |
| working temperature | -16℃~+65℃ |
| Inside Contact Diameter | 2mm |
| Rated voltage | 30V |
| Outside Contact Diameter | 6.4mm |
| Description | Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle |
| Mfr. Part # | DC-470-1-2.1/351 |
| Package | Through Hole |
| Model Number | DC-470-1-2.1/351 |
View Detail Information
Explore similar products
circular connector Amphenol HVSLS600062A025 with 37 contacts aluminum alloy
Industrial DC Power Socket kinghelm KH-DC-005B-2.5 Connector Suitable for
DC power connector HMTCONN DC005-B25 with 5000 cycles service life and wide
Field installable plastic power connector Amphenol UPCP012ALS2 featuring RADSOK
Product Specification
| Mounting Type | 弯插 | Connector Type | DC电源插座 |
| Rated current | 500mA | working temperature | -16℃~+65℃ |
| Inside Contact Diameter | 2mm | Rated voltage | 30V |
| Outside Contact Diameter | 6.4mm | Description | Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle |
| Mfr. Part # | DC-470-1-2.1/351 | Package | Through Hole |
| Model Number | DC-470-1-2.1/351 |
DC Power Jack, Model DC-470-1-2.1-351, rated for DC 30V 0.5A. Designed for practical use within a temperature range of -16C to +65C. This component meets stringent mechanical, electrical, and environmental specifications, ensuring reliable performance in various applications.
| Item | Test Conditions | Performance |
| Mechanical | ||
| Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3~30N |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3~30N |
| Terminal Strength | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. | No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. |
| Electrical | ||
| Contact Resistance | Measured at small current (100mA or less), 1000Hz. | 0.03 |
| Insulation Resistance | Apply a voltage of 500V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | 100M |
| Dielectric Strength | AC 500V rms(50~60Hz) for 1 min. Trip current:0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | Without damage to parts, arcing or breakdown etc. |
| Durability | ||
| Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2405C for 30.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 95%. |
| Resistance to Soldering Heat Test | Soldering iron method: Bit temperature 3305C. Application time of soldering iron 30.5 seconds. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Humidity Test | The jack shall be stored at a temperature of 402C and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr. | Other procedures. |
| Heat Test | The jack shall be stored at a temperature of 702C for 96 hours, and then it shall be subjected to the controlled recovery measurement. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Cold Test | The jack shall be stored at a temperature of -253C for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Life Test (No Load) | Connection and disconnection shall be made with the mating plugs and jacks for 5,000 cycles at a speed of 10 to 25 cycles/min. | N/A |
| Life Test (Load) | Load: At rating condition (non-inductive load). Connection and disconnection shall be made 1,000 cycles at a speed 10 to 20 cycles / min. | (1) Contact resistance shall be 0.1. (2) Disconnection force shall be 3 to 30N. (3) Mechanical and electrical characteristics shall be satisfied. |
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned to room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 30N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
| Salt Mist Test | 1. Testing Bath: Temperature shall be 35C2C. 2. Spray Apparatus: Capable of producing fine dense mist uniformly. 3. Salt Water: Concentration 51% weight ratio at 35C2C. 4. Testing Time: 240.5 hours. After washed in water, sample shall be left alone for 1 or 2 hours in a room ambient. | Appearance shall not extremely rust. Contacting portions should work without hindrance for practical use. |
| Heat Shock Test | The jack shall be subjected to 6 cycles of the following conditions, and then shall be returned to room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 30N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!