Shenzhen ECER Network Technology Co., Ltd.
| Y-Width of Bottom Edge on Board | 5.52mm |
| Pins Structure | 1x15P |
| Reference Series | PicoBlade(MX 1.25) |
| Contact Plating | 锡 |
| Contact Material | 铜;LCP |
| Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | - |
| Supplementary Features | - |
| Pitch | 1.25mm |
| Voltage Rating (Max) | 200V |
| Number of PINs Per Row | 15 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 23.9mm |
| Z-Height of the Board | 3.45mm |
| Row Spacing | - |
| Mounting Type | 卧贴 |
| Description | Connector Header 15 position 1.25mm Pitch Surface Mount, Right Angle |
| Mfr. Part # | 1.25T-15P |
| Package | SMD,P=1.25mm,Surface Mount,Right Angle |
| Model Number | 1.25T-15P |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Y-Width of Bottom Edge on Board | 5.52mm | Pins Structure | 1x15P |
| Reference Series | PicoBlade(MX 1.25) | Contact Plating | 锡 |
| Contact Material | 铜;LCP | Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | - | Supplementary Features | - |
| Pitch | 1.25mm | Voltage Rating (Max) | 200V |
| Number of PINs Per Row | 15 | Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 23.9mm | Z-Height of the Board | 3.45mm |
| Row Spacing | - | Mounting Type | 卧贴 |
| Description | Connector Header 15 position 1.25mm Pitch Surface Mount, Right Angle | Mfr. Part # | 1.25T-15P |
| Package | SMD,P=1.25mm,Surface Mount,Right Angle | Model Number | 1.25T-15P |
This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. These connectors are designed for applications requiring reliable electrical connections with specific performance characteristics under various environmental conditions.
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 1.0A [AC (virtual value) / DC] | |
| Ambient Temperature Range | -25 +85 | |
| Performance - Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Performance - Mechanical Performance | ||
| Insertion Force | 5 * n (N) MAX | Insert and extract applicable at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.3 * n (N) MIN | Insert and extract applicable at the speed rate of 253mm/minute. |
| Terminal Retention Force | 10 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Performance - Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise (at Rated Current) | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration (Discontinuity) | 1 ms MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X, Y, Z axes. (DC 1mA applied) |
| Shock (Discontinuity) | 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes. (DC 1mA applied) |
| Heat Resistance (Contact Resistance) | 60 m MAX | 852, 96 hours. |
| Heat Resistance (Appearance) | No Damage | 852, 96 hours. |
| Cold Resistance (Contact Resistance) | 60 m MAX | -402, 96 hours. |
| Cold Resistance (Appearance) | No Damage | -402, 96 hours. |
| Cold Resistance (Dielectric Strength) | Must meet 4.1.3 | -402, 96 hours. |
| Humidity (Insulation Resistance) | 100 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. |
| Humidity (Appearance) | No Damage | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. |
| Temperature Cycling (Contact Resistance) | 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes. |
| Temperature Cycling (Appearance) | No Damage, Corrosion | 5 cycles of: a) -553 30 minutes b) 852 30 minutes. |
| Salt Spray (Contact Resistance) | 60 m MAX | 484 hours exposure to a salt spray from the 51% solution at 352. |
| SO2 Gas (Contact Resistance) | 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| SO2 Gas (Appearance) | No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas (Contact Resistance) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder ability (Solder Wetting) | 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2355. (0.2 mm from terminal tip) |
| Resistance to Soldering Heat (Appearance) | No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2605. (At least 5 times) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!