| Y-Width of Bottom Edge on Board | 4.75mm |
| Reference Series | PicoBlade(MX 1.25) |
| Pins Structure | 1x6P |
| Contact Plating | - |
| Contact Material | -;- |
| Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | - |
| Supplementary Features | - |
| Pitch | 1.25mm |
| Voltage Rating (Max) | 125V |
| Number of PINs Per Row | 6 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | - |
| Z-Height of the Board | 3.7mm |
| Row Spacing | - |
| Mounting Type | 立贴 |
| Description | Connector Header 6 position 1.25mm Pitch Surface Mount,Vertical |
| Mfr. Part # | 1.25T-6P |
| Package | SMD,P=1.25mm |
| Model Number | 1.25T-6P |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Y-Width of Bottom Edge on Board | 4.75mm | Reference Series | PicoBlade(MX 1.25) |
| Pins Structure | 1x6P | Contact Plating | - |
| Contact Material | -;- | Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | - | Supplementary Features | - |
| Pitch | 1.25mm | Voltage Rating (Max) | 125V |
| Number of PINs Per Row | 6 | Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | - | Z-Height of the Board | 3.7mm |
| Row Spacing | - | Mounting Type | 立贴 |
| Description | Connector Header 6 position 1.25mm Pitch Surface Mount,Vertical | Mfr. Part # | 1.25T-6P |
| Package | SMD,P=1.25mm | Model Number | 1.25T-6P |
This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. These connectors are designed for applications requiring reliable electrical connections with specific performance characteristics under various environmental conditions.
| Item | Specification | Requirement |
|---|---|---|
| 3. RATINGS | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) [AC (virtual value)/DC] | 1.0A | |
| Ambient Temperature Range | -25 +85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Insertion and Withdrawal Force | Insert and extract applicable at the speed rate of 253mm/minute. | Insertion: 5 * n (N) MAX Withdrawal: 0.3 * n (N) MIN |
| Terminal Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 10 N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX |
| Appearance | No Damage | |
| Contact Resistance | 60 m MAX | |
| Vibration | DC 1mA under energized condition; vibration along X, Y, Z axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA under energized condition; 490m/s {50G} shock in 6 directions perpendicular to each other; 3 times each. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | 852, 96 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | -402, 96 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Dielectric Strength | Must meet 4.1.3 | |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. | Insulation Resistance: 100 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip | Solder Wetting: 95% or more area |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2605 | Appearance: No Damage, Deformation |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!