Shenzhen ECER Network Technology Co., Ltd.
| Connector Type | RJ45插座 |
| PoE | 不带PoE |
| Shielding | 有屏蔽 |
| Number of Ports | 1 |
| Mounting Type | 弯插 |
| LED | 带LED |
| Description | Jack Modular Connector Through Hole |
| Mfr. Part # | RC00130 |
| Package | Through Hole |
| Model Number | RC00130 |
View Detail Information
Explore similar products
RJ45 Jack with Magnetic Module ABRACON ARJ11E MBSA A B EM2 Supporting 1000 Base
Network communication components featuring Bel Fuse SS-7188S-A-NF-1-50 for
ABRACON ARJ11G MBSD LU2 Vertical Mount RJ45 10 100 Base T Connector with
Connector Protective Coating Bel Fuse SS65600-004F for Long Term Durability and
Product Specification
| Connector Type | RJ45插座 | PoE | 不带PoE |
| Shielding | 有屏蔽 | Number of Ports | 1 |
| Mounting Type | 弯插 | LED | 带LED |
| Description | Jack Modular Connector Through Hole | Mfr. Part # | RC00130 |
| Package | Through Hole | Model Number | RC00130 |
This specification applies to Network Connectors designed for electronic products. These connectors offer reliable electrical performance with specified voltage and current ratings, suitable for various electronic applications. They are constructed with durable materials and undergo rigorous testing to ensure performance and longevity.
| Category | Parameter Name | Required Value | Manufacturer Specification Value | Manufacturer Test Value | Test Condition | Judgment Standard |
|---|---|---|---|---|---|---|
| Basic Specification | Hole Count | 1 | 1 | - | - | - |
| Angle | 180 | 180 | - | - | - | |
| Material | Plastic Seat | PA46 (Black) 15% recycled material | PA46 (Black) 15% recycled material | - | - | - |
| Round Pin | Phosphor Copper =0.46mm (Au=FU") Salt Fog 8H | Phosphor Copper =0.46mm (Au=FU") Salt Fog 8H | - | - | - | |
| LED (Light) | Green-Yellow (Resin/FE) Salt Fog 8H | Green-Yellow (Resin/FE) Salt Fog 8H | - | - | - | |
| Shield Shell | Brass (Nickel Plated 30-50" Salt Fog 24H) | Brass (Nickel Plated 30-50" Salt Fog 24H) | - | - | - | |
| Structural Dimensions | Key Dimension 1 | 16.650.15mm | 16.650.15mm | 16.61 | - | - |
| Key Dimension 2 | 15.90.15mm | 15.90.15mm | 15.91 | - | - | |
| Key Dimension 3 | 11.430.15mm | 11.430.15mm | 11.34 | - | - | |
| Key Dimension 4 | 16.450.15mm | 16.450.15mm | 16.45 | - | - | |
| Key Dimension 5 | 3.60.25mm | 3.60.25mm | 3.25 | - | - | |
| Normal Dimension 6 | 2.540.15mm | 2.540.15mm | 2.57 | - | - | |
| Normal Dimension 7 | 8.890.15mm | 8.890.15mm | 8.87 | - | - | |
| Normal Dimension 8 | 3.80.15mm | 3.80.15mm | 3.8 | - | - | |
| Normal Dimension 9 | 4.060.15mm | 4.060.15mm | 4.05 | - | - | |
| Normal Dimension 10 | 15.70.15mm | 15.70.15mm | 15.71 | - | - | |
| Normal Dimension 11 | 2.00.1mm | 2.00.1mm | 2.01 | - | - | |
| Electrical Performance | Rated Voltage | 125V | 125V | - | Socket operates normally at rated voltage, no obvious temperature rise. | - |
| Rated Current | 1.5A | 1.5A | - | Socket operates normally at rated current, no obvious temperature rise. | - | |
| Contact Resistance | <0.03 | <0.03 | - | Maximum 0.03 | - | |
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | - | Minimum 100M | - | |
| Withstand Voltage | AC 500V (1min) | AC 500V (1min) | - | No dielectric breakdown. | - | |
| Reliability | Insertion Force | 330N | 330N | Product Average: 12.5N | Frequency of 12.5mm/min, uniform speed, with matching plug. | Judgment Standard: 330N |
| Extraction Force | 330N | 330N | Product Average: 10.2N | Frequency of 12.5mm/min, uniform speed, with matching plug. | Judgment Standard: 330N | |
| Plug-unplug Lifespan | 750 cycles | 750 cycles | - | Under no-load conditions, 8-10 times per minute. | 1. Insertion and extraction force: 330N. 2. Contact resistance: <0.03. | |
| Heat Resistance | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | - | - | 1. Contact resistance <0.03. 2. Insulation resistance >100M. 3. No signs of mechanical or electrical damage. | |
| Soldering Temperature Resistance | 230, 5S | 230, 5S | - | - | 1. Plastic base should not deform, terminals should not detach after test. 2. Mechanical and electrical characteristics should be met. | |
| Salt Spray | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | - | - | 1. No obvious signs of rust on appearance. | |
| Operating Temperature | -4070 | -4070 | - | - | 1. No obvious damage to the appearance of the socket within the required temperature range. | |
| Storage Temperature and Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | - | - | 1. Contact resistance <0.03. 2. Insulation resistance >100M. 3. No signs of mechanical or electrical damage. | |
| Storage Period | 0.8 years | 0.8 years | - | Stored under clean, ventilated, non-corrosive gas, partition, off-ground conditions. | - | |
| General Specification | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - | - | - |
| Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | - | - | - | - | |
| Operating Environment (Standard Temperature) | -20+70 | - | - | - | - | |
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for one minute, Leakage current 0.5mA MAX. | - | - | Between mutually insulated pin contacts. No dielectric breakdown shall occur. | - |
| Insulation Resistance | 100 M MIN. | - | - | Using a 500 volts DC insulation resistance meter between mutually insulated terminals or metallic parts. | - | |
| Mechanical Efficiency | Insertion Force | Below 20N | - | - | Insertion and extraction with matching plug at a rate of 20-30 times/minute, averagely (remove lock part). | - |
| Extraction Force | Below 20N | - | - | Insertion and extraction with matching plug at a rate of 20-30 times/minute, averagely (remove lock part). | - | |
| Durability | Lifetest | 750 cycles | - | - | 750 cycles of insertion and extraction with mated plug, at a rate of 20 to 30 cycles per minutes. | Product will not be destroyed. Contact resistance: 30m MIN. |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | - | - | Terminals dipped in solder. | Jack's appearance: housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency. |
| Environment Test | Cold Test | -252 for 96 hours, then 30 minutes in ambient conditions. | - | - | - | - |
| Heat Test | 702 for 96 hours, then 30 minutes in ambient conditions. | - | - | - | - | |
| Humidity Test | 402 and 90%-95% RH for 96 hours, then 30 minutes in ambient conditions. | - | - | - | - | |
| Temperature Cycling Test | Conditions as shown below, then 30 minutes in ambient condition. Temperature of solder: 2453. Time of dip: 30.5 seconds. Length of dip: 2.0 mm. | - | - | - | - | |
| Salt Mist Test | 8 hours (352, 51% salt water concentration) | - | - | - | - | Appearance shall not be extremely rust. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!