Shenzhen ECER Network Technology Co., Ltd.
| LED | 不带LED |
| Description | Jack Modular Connector Through Hole |
| Mfr. Part # | RC00120 |
| Package | Through Hole |
| Model Number | RC00120 |
View Detail Information
Explore similar products
RJ45 Jack with Magnetic Module ABRACON ARJ11E MBSA A B EM2 Supporting 1000 Base
Network communication components featuring Bel Fuse SS-7188S-A-NF-1-50 for
ABRACON ARJ11G MBSD LU2 Vertical Mount RJ45 10 100 Base T Connector with
Connector Protective Coating Bel Fuse SS65600-004F for Long Term Durability and
Product Specification
| LED | 不带LED | Description | Jack Modular Connector Through Hole |
| Mfr. Part # | RC00120 | Package | Through Hole |
| Model Number | RC00120 |
This specification applies to NETWORK CONNECTORS used in electronic products. The product is designed for electrical connectivity, offering reliable performance across various environmental conditions. It is suitable for applications requiring stable electrical characteristics and mechanical durability.
| Category | Parameter Name | Required Value | Manufacturer Specification Value | Manufacturer Test Value | Test Condition | Performance/Judgment Standard |
|---|---|---|---|---|---|---|
| Basic Specification | Number of Holes | 1 | 1 | - | - | - |
| Angle | 180 | 180 | - | - | - | |
| Key Dimensions | Dimension 1 | 16.650.15mm | 16.650.15mm | 16.63 | - | - |
| Dimension 2 | 15.90.15mm | 15.90.15mm | 15.89 | - | - | |
| Dimension 3 | 11.430.15mm | 11.430.15mm | 11.38 | - | - | |
| Dimension 4 | 16.450.15mm | 16.450.15mm | 16.45 | - | - | |
| Dimension 5 | 3.20.25mm | 3.20.25mm | 3.23 | - | - | |
| Normal Dimensions | Dimension 6 | 2.540.15mm | 2.540.15mm | 2.56 | - | - |
| Dimension 7 | 8.890.15mm | 8.890.15mm | 8.89 | - | - | |
| Dimension 8 | 2.20.15mm | 2.20.15mm | 2.21 | - | - | |
| Dimension 9 | 3.80.15mm | 3.80.15mm | 3.79 | - | - | |
| Dimension 10 | 15.70.15mm | 15.70.15mm | 15.69 | - | - | |
| Dimension 11 | 1.60.1mm | 1.60.1mm | 1.63 | - | - | |
| Electrical Performance | Rated Voltage | 125V | 125V | - | At 125V rated voltage | Normal operation, no obvious heating. |
| Rated Current | 1.5A | 1.5A | - | At 1.5A rated current | Normal operation, no obvious heating. | |
| Contact Resistance | <0.03 | <0.03 | - | - | Maximum 0.03 | |
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | - | - | Minimum 100M | |
| Withstand Voltage | AC500V (1min) | AC500V (1min) | - | - | No dielectric breakdown. | |
| Reliability | Insertion Force | 330N | 330N (at 12.5mm/min, uniform speed, with matching plug) | Product Average: 12.5N | - | Judgment Standard: 330N |
| Extraction Force | 330N | 330N (at 12.5mm/min, uniform speed, with matching plug) | Product Average: 10.2N | - | Judgment Standard: 330N | |
| Plug-unplug Life | 750 cycles (8-10 times/min, no load) | 750 cycles (8-10 times/min, no load) | - | - | 1. Insertion/Extraction Force: 3~30N. 2. Contact Resistance: <0.03. | |
| Heat Resistance | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | - | - | 1. Contact Resistance: <0.03. 2. Insulation Resistance: >100M. 3. No signs of mechanical or electrical damage. | |
| Solder Heat Resistance | 230, 5S | 230, 5S | - | - | 1. Plastic seat should not deform after test, terminals should not be loose. 2. Mechanical and electrical characteristics should be met. | |
| Salt Spray | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | - | - | 1. No obvious rust on appearance. | |
| Operating Temperature | -4070 | -4070 | - | - | 1. No obvious damage to the appearance of the socket within the required temperature range. | |
| Storage Temperature & Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | - | - | 1. Contact Resistance: <0.03. 2. Insulation Resistance: >100M. 3. No signs of mechanical or electrical damage. | |
| General Specification | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - | - | - |
| General Specification | Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | - | - | - | - |
| Operating Environment | Standard Temperature | -20+70 | - | - | - | - |
| Operating Environment | Industrial Temperature | -40+85 (According to customer request) | - | - | - | - |
| Operating Environment | Humidity | 20%70% | - | - | - | - |
| Storage Environment | Temperature | -40 to +85 | - | - | - | - |
| Storage Environment | Humidity | 20%70% | - | - | - | - |
| Test Environment | Temperature | +20+30 | - | - | - | - |
| Test Environment | Humidity | 25%65% | - | - | - | - |
| Test Environment | Atmospheric Pressure | 86-106KPA | - | - | - | - |
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for one minute, Leakage current 0.5mA MAX. | - | - | Between mutually insulated pin contacts | No dielectric breakdown shall occur. |
| Electrical Efficiency | Insulation Resistance | 100 M MIN. | - | - | Using a 500 volts DC insulation resistance meter between mutually insulated terminals or metallic parts | - |
| Electrical Efficiency | Contact Resistance | 30 M MIN. | - | - | Across a pair of mated contacts (20mV, 100mA max), for AC frequency below 2KHz. | - |
| Mechanical Efficiency | Insertion Force | Below 20N | - | - | With the rate of 20-30 times/minute, averagely (remove lock part) | Extraction force below 20N. |
| Mechanical Efficiency | Terminal Strength | Withstand a force of 1-4N for 10 seconds. | - | - | - | Without loosing and breakdown, but deformation of terminal is accepted. |
| Durability | Life Test | 750 cycles (20 to 30 cycles per minutes) | - | - | Insertion and extraction with mated plug | The jack will not be destroyed. Contact resistance: 30m MIN. |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | - | - | Terminal dipped in solder | Housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency paragraphs. |
| Environment Test | Cold Test | -252 for 96 hours, then 30 minutes in room ambient conditions. | - | - | - | - |
| Environment Test | Heat Test | 702 for 96 hours, then 30 minutes in room ambient conditions. | - | - | - | - |
| Environment Test | Humidity Test | 402 and 90% to 95% relative humidity for 96 hours, then 30 minutes in room ambient conditions. | - | - | - | - |
| Environment Test | Temperature Cycling Test | -40 to +85 (Cycles as specified), then 30 minutes in room ambient conditions. | - | - | - | - |
| Salt Mist Test | Test Condition | 352, 5%1% salt water concentration, 8 hours. | - | - | - | Appearance shall not be extremely rust. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!