Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -30℃~+70℃ |
| Connector Type | 2.5mm耳机座 |
| Voltage Rating (Max) | 30V |
| Current Rating | 500mA |
| Description | 2.5mm Headphone Jack 500mA 30V Surface Mount |
| Mfr. Part # | HX PJ-242 |
| Package | SMD |
| Model Number | HX PJ-242 |
View Detail Information
Explore similar products
High reliability Amphenol ACPR-BLU connector suitable for complex machinery and
Compact combined XLR female and 635mm phone jack connectors Amphenol ACJC6AVL
Electronic component Amphenol TPS-105 model distributed by authorized Mouser
Adafruit Industries 1803 metal 1 quarter inch stereo plug designed for heavy
Product Specification
| Operating Temperature | -30℃~+70℃ | Connector Type | 2.5mm耳机座 |
| Voltage Rating (Max) | 30V | Current Rating | 500mA |
| Description | 2.5mm Headphone Jack 500mA 30V Surface Mount | Mfr. Part # | HX PJ-242 |
| Package | SMD | Model Number | HX PJ-242 |
The HX PJ-242 is a Phone Jack designed and manufactured by Shenzhen Hanxia Electronic Co., Ltd. It is suitable for use within a practical temperature range of -30C to +70C and standard atmospheric conditions. This product is engineered to meet stringent performance, mechanical, and electrical specifications, ensuring reliability in various applications.
| Item | Test Conditions | Performance Specification |
|---|---|---|
| CONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3-20N |
| PLUG GAUGE 3 | 3-20N | |
| DISCONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3-20N |
| PLUG GAUGE 3 | 3-20N | |
| TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | N/A |
| 1 0.1N/m(1kgf/cm). | N/A | |
| CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | 30m |
| 100 m A | 30m | |
| INSULATION RESISTANCE | Apply a voltage of 500V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M |
| 500V DC 1 1 2 3 | 100M | |
| DIELECTRIC STRENGTH | AC 500V rms(50~60Hz) for 1 min. Trip current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts arcing or breakdown etc. |
| AC 500V 50Hz/min 1 0.5mA, : (1) (2) (3) | ||
| SOLDERABILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2405 for 30.5 seconds. (1) Solder wetting time shall be 3 seconds or less (2) The area of soldering should be over 75% | N/A |
| 1mm ,2405,3 0.5 13 275% | N/A | |
| RESISTANCE TO SOLDERING HEAT TEST (Reflow Soldering) | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180, 120s after the P.C.B entered into the soldering equipment. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | N/A |
| :180, 120s :260520 | N/A | |
| RESISTANCE TO SOLDERING HEAT TEST (Soldering Iron Method) | Bit temperature 3305. Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | N/A |
| 3305 30.5 | N/A | |
| HUMIDITY TEST | The jack shall be stored at a temperature of 402 and a humidity of 90%to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | N/A |
| 402 90~96% Hr 96 1 | N/A | |
| HEAT TEST | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery. There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A |
| 70296 1 | N/A | |
| COLD TEST | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A |
| -25396 1 | N/A | |
| LIFE TEST | At rating condition (non-inductive load) connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 3 to 20N (3) Mechanical and electrical characteristics shall be satisfied. | N/A |
| ()1 10~20 5000 (1) 0.1 (2) 3~20N (3) :, | N/A | |
| COLD&HEAT SHOCK TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & extraction force: 3 to 20N. Contact resistance: Max. 30m. Insulation resistance: Min. 100 M. Dielectric withstanding voltage: 500VAC/min (between terminals). | N/A |
| 5 30 . 3N 20N 30m 100 M 500VAC | N/A |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!