Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Interface | 内针 |
| RF Series | IPEX |
| Connector Type | 板端 |
| Style | - |
| Operating Temperature | -40℃~+90℃ |
| Frequency | 6GHz |
| Impedance | 50Ω |
| Interface Diameter | 2mm |
| Description | Connector Receptacle IPEX Male Pin 500Ω Surface Mount |
| Mfr. Part # | HX IPEX 1.0-4P |
| Package | SMD |
| Model Number | HX IPEX 1.0-4P |
View Detail Information
Explore similar products
Brass gold plated communication assembly with insulator pin pins and rear plug
Professional grade kinghelm KH-MMCX-K510-Z connector cable suitable for
Crimp Non Solder TNC Male Connector L com EZ 600 TM X LC for Laboratory and
High Voltage 50 Ohm Male Clamp Coaxial Connector L-com ANM-2602 with Brass
Product Specification
| Number of Ports | 1 | Interface | 内针 |
| RF Series | IPEX | Connector Type | 板端 |
| Style | - | Operating Temperature | -40℃~+90℃ |
| Frequency | 6GHz | Impedance | 50Ω |
| Interface Diameter | 2mm | Description | Connector Receptacle IPEX Male Pin 500Ω Surface Mount |
| Mfr. Part # | HX IPEX 1.0-4P | Package | SMD |
| Model Number | HX IPEX 1.0-4P |
This document outlines the specifications for the HX IPEX 1.0-4P antenna seat, manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the product's application conditions, environmental requirements, electrical characteristics, and rigorous testing procedures to ensure performance and reliability.
| Item | Specification | Test Method |
|---|---|---|
| 1.1 Application Conditions | ||
| Operating Environment | Temperature: -40C to +90C, Relative Humidity: 25%~85% (Without loss of function) | N/A |
| Storage Environment | Temperature: -55C to +100C, Relative Humidity: 95% or Less (Without loss of function) | N/A |
| Voltage Rating | 60VAC | N/A |
| Nominal Characteristic Impedance | 50 | N/A |
| Frequency | DC0.1~6GHz | N/A |
| VSWR (Plug) | 1.3 Max. (DC0.1~3GHz), 1.5 Max. (3~6GHz) | N/A |
| VSWR (Receptacle) | 1.3 Max. (DC0.1~3GHz), 1.4 Max. (3~6GHz) | N/A |
| 1.3 Test Conditions | ||
| Temperature | 15~35 | N/A |
| Humidity | 45% ~ 75% | N/A |
| 1.4 Test Requirements and Methods | ||
| Product Appearance | All components shall be properly assembled and free of burrs, warps, scratches, broken chips, and other abnormalities. | EIA 364-18B |
| Low Level Contact Resistance | Initial: 20m Max., Final: 70m Max. | N/A |
| Insulation Resistance | Initial: 500 M Min., Final: 100 M Min. | EIA-364-21D (100V DC for 1 minute) |
| Dielectric Withstanding Voltage | Current leakage: 0.50 mA Max. No evidence of breakdown or flash burn. | EIA-364-20D, Test Method B (300V AC for 1 minute) |
| VSWR | Frequency: 100M~6GHz | Network analyzer |
| Un-mating Force | Initial: 5N Min., After 30 cycles: 3N Min. | Push-on/pull-off machine at 253mm/min |
| Crimp Strength | 5N MIN | Tensile strength machine at 253mm/min |
| Durability (30 cycles) | Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Appearance: No abnormality. | EIA 364-09C (Mate and un-mate at 253mm/min) |
| Cable Retention Force | Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Electrical discontinuity: No interruption > 1 micro-sec. | Apply force on cable, 100mA DC during test. |
| Vibration | Appearance: No abnormality. Electrical discontinuity: No interruption > 1 micro-sec. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | EIA 364-28E (10Hz-100Hz-10Hz/approx 20 min, 1.5mm half amplitude/59m/s (6G), 3 directions) |
| Physical Shock | Appearance: No abnormality. Electrical discontinuity: No interruption > 1 micro-sec. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | EIA 364-27B (735m/s (75G), 11msec, half sinusoidal, 6 directions) |
| Humidity | Appearance: No abnormality. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Insulation resistance: Initial 500M Min., After test 100M Min. DWV: No discharge or breakdown. | EIA 364-31C, Method II, Condition A (402C, 90~95% RH, 96 hours) |
| Thermal Shock | Appearance: No abnormality. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Insulation resistance: Initial 500M Min., After test 100M Min. | EIA 364-32E (-55C for 30 min 85C for 30 min, transition time 5 min, 5 cycles) |
| Temperature Life | Appearance: No abnormality. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | (902C, 96 hours) |
| H2S Gas | Appearance: No abnormality, good performance. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | (402C, 805% RH, H2S 31ppm, 96 hours) |
| Salt Mist | Appearance: No abnormality, good performance. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | EIA 364-26B, Method 101, Condition B (352C, 51% salt water, 48 hours) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!