Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Interface | 内针 |
| RF Series | IPEX |
| Connector Type | 板端 |
| Style | - |
| Rated voltage | - |
| Operating Temperature | -40℃~+90℃ |
| Frequency | 6GHz |
| Impedance | 50Ω |
| Interface Diameter | 1.5mm |
| Description | Connector Receptacle IPEX Male Pin 500Ω Surface Mount |
| Mfr. Part # | HX IPEX 4.0-4P |
| Package | SMD |
| Model Number | HX IPEX 4.0-4P |
View Detail Information
Explore similar products
Brass gold plated communication assembly with insulator pin pins and rear plug
Professional grade kinghelm KH-MMCX-K510-Z connector cable suitable for
Crimp Non Solder TNC Male Connector L com EZ 600 TM X LC for Laboratory and
High Voltage 50 Ohm Male Clamp Coaxial Connector L-com ANM-2602 with Brass
Product Specification
| Number of Ports | 1 | Interface | 内针 |
| RF Series | IPEX | Connector Type | 板端 |
| Style | - | Rated voltage | - |
| Operating Temperature | -40℃~+90℃ | Frequency | 6GHz |
| Impedance | 50Ω | Interface Diameter | 1.5mm |
| Description | Connector Receptacle IPEX Male Pin 500Ω Surface Mount | Mfr. Part # | HX IPEX 4.0-4P |
| Package | SMD | Model Number | HX IPEX 4.0-4P |
This document outlines the specifications for the HX IPEX 4.0-4P connector manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the application conditions, environmental requirements, electrical ratings, and comprehensive test procedures to ensure product performance and reliability.
| Item | Requirements | Test Method |
| Application Conditions | ||
| Operating Environment | Temperature: -40C to +90C, Relative Humidity: 25%~85% (Without loss of function) | |
| Storage Environment | Temperature: -55C to +100C, Relative Humidity: 95% or Less (Without loss of function) | |
| Ratings | ||
| Voltage Rating | 60VAC | |
| Nominal Characteristic Impedance | 50 | |
| Frequency | DC0.1~6GHz | |
| VSWR (Plug) | 1.3 Max. (DC0.1~3GHz), 1.5 Max. (3~6GHz) | |
| VSWR (Receptacle) | 1.3 Max. (DC0.1~3GHz), 1.4 Max. (3~6GHz) | |
| Test Requirements and Methods | ||
| Product Appearance | All components shall be properly assembled and free of burrs, warps, scratches, broken chips, and other abnormalities. | EIA 364-18B |
| Low Level Contact Resistance | Initial: 20m Max. Final: 70m Max. | |
| Insulation Resistance | Initial: 500 M Min. Final: 100 M Min. | EIA-364-21D (Apply 100V DC for 1 minute between adjacent contacts) |
| Dielectric Withstanding Voltage | Current leakage: 0.50 mA Max. No evidence of breakdown or flash burn. | EIA-364-20D, Method B (Apply 300V AC for 1 minute on tested plug and connectors) |
| VSWR | Frequency: 100M~6GHz | Measure using network analyzer |
| Un-mating Force | Initial: 5N Min. After 30 cycles: 3N Min. | Push-on/pull-off machine at 253mm/min |
| Crimp Strength | 5N MIN | Tensile strength machine at 253mm/min |
| Durability | Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Appearance: No abnormality. | Mate and un-mate 30 cycles at 253mm/min. EIA 364-09C. |
| Cable Retention Force | Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. | Apply force on cable. Run 100mA DC during testing. |
| Vibration | Appearance: No abnormality. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. | Frequency: 10Hz-100Hz-10Hz/approx 20 minutes. Half amplitude, peak acceleration: 1.5mm or 59m/s(6G). 3 directions. Run 100mA DC. EIA-364-28E. |
| Physical Shock | Appearance: No abnormality. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. | Peak acceleration: 735m/s(75G). Duration: 11msec. Half sinusoidal waveform. 6 directions. Run 100mA DC. EIA-364-27B. |
| Humidity | Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Insulation resistance: Initial 500M MIN, after testing 100M MIN. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown. | Temperature: 402C, Humidity: 90~95%RH, Duration: 96 hours. EIA-364-31C, Method II, Condition A. |
| Thermal Shock | Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Insulation resistance: Initial 500M MIN, after testing 100M MIN. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown. | Cycles: -55C (30 min) 85C (30 min). Transition time: 5 min Max. 5 cycles. EIA-364-32E. |
| High Temperature Life | Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. | Temperature: 902C, Duration: 96 hours. EIA-364-17B. |
| H2S Gas Test | Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. | Temperature: 402C, Humidity: 805%RH, Gas: H2S 31ppm, Duration: 96 hours. |
| Salt Spray Test | Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. | Temperature: 352C, Salt water density: 51% (by weight), Duration: 48 hours. EIA-364-26B, Method 101, Condition B. |
| Solder Ability | Appearance: No abnormality. Performance: Good. | Reflow profile: Number of times 2. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!