| colour | 黑色 |
| Number of Rows | 2 |
| With Wings | 不带翅 |
| Operating Temperature | -40℃~+125℃ |
| Plastic Material | PA |
| Number of PINs Per Row | 7 |
| Number of Positions or Pins | 2x7P |
| With Locker | 不带锁扣 |
| Description | nan |
| Mfr. Part # | ZE064W-14DS-HU/R(A) |
| Model Number | ZE064W-14DS-HU/R(A) |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| colour | 黑色 | Number of Rows | 2 |
| With Wings | 不带翅 | Operating Temperature | -40℃~+125℃ |
| Plastic Material | PA | Number of PINs Per Row | 7 |
| Number of Positions or Pins | 2x7P | With Locker | 不带锁扣 |
| Description | nan | Mfr. Part # | ZE064W-14DS-HU/R(A) |
| Model Number | ZE064W-14DS-HU/R(A) |
The ZE064W Series is a compact and waterproof connector designed for demanding automotive and industrial applications. It offers space-saving benefits due to its small size (0.64mm terminal, 2.2mm pitch) and high reliability in harsh environments, featuring excellent vibration and heat resistance. Its IP67/IP69K waterproof rating ensures performance even under high-pressure washing, making it ideal for engine room installations and other challenging conditions.
| Item | Specifications | Conditions |
| Rated Current | 2A (All pins power supply) / 5A (Single pin power supply) | |
| Operating Temperature | -40 to +125 | (Includes the temperature rise by current flow) |
| Storage Temperature | -10 to +60 | (Note 1: For long-term storage of unused products) |
| Rated Voltage | 60V AC/DC | |
| Storage Humidity Range | Relative humidity 85% or less (no condensation) | (Note 1) |
| Contact Resistance | 8m Max. | Measured at 1A DC |
| Insulation Resistance | 100M Min. | Measured at 500V DC |
| Withstanding Voltage | 1000V AC for 1 min. | There shall be no dielectric breakdown. |
| Mating Durability | 30 mating cycles (insertion/extraction) | Contact Resistance: 16m Max. No damage, cracks or component breakage. |
| Vibration Resistance | Frequency: 20 to 200Hz (acceleration: 88m/s2) 3 minutes per cycle (Repeated) 3 directions, 3 hours each. | No electrical discontinuity of 7 or more for 1s or more. Contact Resistance: 16m Max. No damage, cracks or component breakage. |
| Lock Strength | 100N Min. | Breaking strength of the lock is measured while pulled in the direction of the mating axis. |
| Humidity Resistance | Left at a temperature of 85 for 96 hours with a relative humidity of 90 to 95%. | Contact Resistance: 16m Max. Insulation Resistance: 100M Min. |
| Thermal Shock | Temperature -40C Room temperature 125C Room temperature Time: 30 5 30 5 minutes for 1000 cycles. | Contact Resistance: 16m Max. No damage, cracks or component breakage. |
| Heat Resistance | Left at a temperature of 140 for 120 hours. | Contact Resistance: 16m Max. No damage, cracks or component breakage. |
| Cold Resistance | Left at a temperature of -40 for 120 hours. | Contact Resistance: 16m Max. No damage, cracks or component breakage. |
| Sulfurous Acid Resistance | Left unmated in sulfurous acid gas for 96 hours at a room temperature with a concentration of 25ppm and a humidity of 75% RH or higher. | Contact Resistance: 16m Max. |
| High Pressure Washing Resistance | After heating for 120 hours at 120, spray for 30 sec. at a temperature of 80 and water pressure of 10MPa at positions 1 through 4. Rotate the mounting table at a speed of 5r/min. | No water infiltration into panel. Insulation Resistance: 100M Min. |
| Product Component | Part Material | Finish |
| Female Connector Housing | PA Resin | Black or Gray |
| Retainer | PA Resin | Beige |
| Seal Cover | PBT Resin | Gray |
| Housing Seal | Silicone Rubber | Rouge |
| Wire Seal | Silicone Rubber | Rouge |
| Male Connector Housing | PA Resin | Black or Gray |
| Retainer | PA Resin | Beige |
| Panel Seal | Silicone Rubber | Rouge |
| Waterproof Cap | PBT Resin | Brown |
| Contacts (Female, Male) | Copper Alloy | Tin Plating |
Series Name: ZE064W
No. of Pos.: 8, 14, 24pos.
Rows: D (double-row)
Connector Type: P (Male), S (Female)
Housing with Retainer: (Standard)
Mating Key: (A), (B)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!