Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 1.5mm |
| colour | 白色 |
| Number of Rows | 1 |
| With Wings | 不带翅 |
| Reference Series | ZH |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 4 |
| Number of Positions or Pins | 1x4P |
| With Locker | 不带锁扣 |
| Row Spacing | - |
| Description | Connector Housing 4 Position 1.5mm Pitch Single Row ZH Series PA66 -25℃~+85℃ |
| Mfr. Part # | HC-ZH-4Y-05 |
| Package | P=1.5mm |
| Model Number | HC-ZH-4Y-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 1.5mm |
| colour | 白色 | Number of Rows | 1 |
| With Wings | 不带翅 | Reference Series | ZH |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 4 | Number of Positions or Pins | 1x4P |
| With Locker | 不带锁扣 | Row Spacing | - |
| Description | Connector Housing 4 Position 1.5mm Pitch Single Row ZH Series PA66 -25℃~+85℃ | Mfr. Part # | HC-ZH-4Y-05 |
| Package | P=1.5mm | Model Number | HC-ZH-4Y-05 |
This specification document outlines the requirements for the 1.50 series ZH connector, a double-row type connector designed for various electrical applications. It details product performance, testing methods, and inspection requirements, ensuring interchangeability and reliability.
| Section | Item | Requirement | Test Mode |
| 3. USE CONDITION | Ambient temperature | -25 85 | |
| 3. USE CONDITION | Applicable Wire Sizes | AWG #2632 | |
| 3. USE CONDITION | Applicable PC board thickness | 0.6l.2mm | |
| 4. Appearance and Dimension | Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| 4. Appearance and Dimension | Dimension | According to drawings | |
| 4. Appearance and Dimension | Exchangeable | Exchangeable with same specification products. | |
| 5. Material | Terminal Contact (P/N: HC-ZH - ****) | Brass (0.50mm thick), Tin plating: 24 m OR Phosphor bronze (0.2mm thick), Tin plating: 24 m | |
| 5. Material | Housing Plastic (P/N: HC-ZH - ****) | Nylon UL94V-O(2), Color: Nature | |
| 5. Material | Wafer (P/N: HC-ZH - ****) | Nylon UL94V-O(2), Color: Nature OR LCP UL94V-O, Color: Nature | |
| 6. Electrical Performance | Rated Voltage | 50V AC/DC | |
| 6. Electrical Performance | Rated Current | 1A AC/DC | |
| 6. Electrical Performance | Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute between adjacent contacts |
| 6. Electrical Performance | Contact Resistance | Initial value 20m (Does not include wire resistance) | Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector |
| 6. Electrical Performance | Insulation Resistance | 500 M | Apply 500V DC(rms) for 1 minute between adjacent contacts |
| 7. Mechanical Performance | Terminal crimping Wire strength | 20N (AWG#26), 8N (AWG#28), 6N (AWG#30), 0.5N (AWG#32) | Axial pullout force at 253mm/min |
| 7. Mechanical Performance | Single contact Withdrawal force | 10N | Mate connector ends pulled out at 253mm/min |
| 7. Mechanical Performance | Single contact insertion force | 3N | Mate connector ends inserted at 253mm/min |
| 7. Mechanical Performance | Pin Retention Force | 13N | Force applied to pin end until needle exits seat at 253mm/min |
| 7. Mechanical Performance | Durability | Contact Resistance 40m; Appearance: No damage | Mate connector up to 30 cycles at 10 cycles/min before environmental test |
| 7. Mechanical Performance | Vibration | Current Interruption: Max 1 sec; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/min; Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature Rise | Measure temperature rise of contact when maximum rated current is passed | |
| 8. Endurance Characteristics | Humidity | Contact Resistance 40m; Insulation Resistance 500m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95%; Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature Cycling | Contact Resistance 40m; Withstand voltage: No breakdown or flashover; Appearance: No damage | One cycle: -553 (30min) room temp (10-15min) 853 (30min) room temp (10-15min); Total cycle: 5 cycles |
| 8. Endurance Characteristics | Solder ability | Solder area: 90 % | Solder temperature: 2455; Immersion period: 30.5S |
| 8. Endurance Characteristics | Salt spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Solution: 51% NaCl; Period: Stamping after tin plated for 8 hours OR Stamping before tin plated for 48 hours |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!