Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2.5mm |
| colour | 蓝色 |
| Number of Rows | 1 |
| With Wings | 不带翅 |
| Reference Series | XH |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 4 |
| Number of Positions or Pins | 1x4P |
| With Locker | 不带锁扣 |
| Row Spacing | - |
| Description | Connector Housing 4 Position 2.5mm Pitch Single Row XH Series PA66 -25℃~+85℃ |
| Mfr. Part # | HC-XH-4Y-L-05 |
| Package | P=2.5mm |
| Model Number | HC-XH-4Y-L-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2.5mm |
| colour | 蓝色 | Number of Rows | 1 |
| With Wings | 不带翅 | Reference Series | XH |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 4 | Number of Positions or Pins | 1x4P |
| With Locker | 不带锁扣 | Row Spacing | - |
| Description | Connector Housing 4 Position 2.5mm Pitch Single Row XH Series PA66 -25℃~+85℃ | Mfr. Part # | HC-XH-4Y-L-05 |
| Package | P=2.5mm | Model Number | HC-XH-4Y-L-05 |
This specification covers the 2.50 series of strip connectors, detailing product performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for various applications requiring a 2.50mm pitch, double-row configuration.
| Item | Requirement | Test Mode |
| 1. Scope | ||
| The contents of specifications for 2.50 series connector strip including product performance, test methods and inspection requirements. | ||
| 2. Applicable Standards | ||
| GB/T2421 | Electrical Connectors Environmental Testing - Part 1: General Principles | |
| GB/T2423 | Electrical Connectors Environmental Testing Methods | |
| GB/T2424 | Electrical Connectors Environmental Testing Guidelines | |
| GB/T5095 | Basic Test Rules and Measuring Methods for Electromechanical Components of Electronic Equipment | |
| 3. Use Condition | ||
| Ambient Temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Housing Plastic Wafer-A | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer-AW | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer-AWD | Nylon66 UL94V-O, Color: White | |
| Contact Pin | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Contact Pin | Phosphor bronze, Thickness 0.2mm, Tin plating: 24 m | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand Voltage | No breakdown or flashover | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 5.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 1.5N | Terminal and hole seat combination, pulled out from the hole seat at a rate of 253mm per minute along the wire direction. |
| Terminal crimping Wire strength | 10N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity |
| Pin Retention Force | 20N (AWG#22 wire) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force |
| Pin Retention Force | 13N (AWG#28 wire) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity Max 1 sec, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000 M, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature Cycling | Contact Resistance 40m, Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle consists of -553C 30min, 853C 30min, room temp 10-15min transition time. Total cycle: 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90 % | Soldering temperature: 2455C, Immersion period: 3 0.5S |
| Manual Soldering | Appearance: No damage | Soldering time: 30.5S, Soldering pot: 3505 |
| Wave Soldering | Appearance: No damage | Soldering time: 50.5S, Soldering pot: 260 5 C |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!