Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2.5mm |
| colour | 蓝色 |
| Number of Rows | 1 |
| With Wings | 不带翅 |
| Reference Series | XH |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 3 |
| Number of Positions or Pins | 1x3P |
| With Locker | 不带锁扣 |
| Row Spacing | - |
| Description | Connector Housing 3 Position 2.5mm Pitch Single Row XH Series PA66 -25℃~+85℃ |
| Mfr. Part # | HC-XH-3Y-L-05 |
| Package | P=2.5mm |
| Model Number | HC-XH-3Y-L-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2.5mm |
| colour | 蓝色 | Number of Rows | 1 |
| With Wings | 不带翅 | Reference Series | XH |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 3 | Number of Positions or Pins | 1x3P |
| With Locker | 不带锁扣 | Row Spacing | - |
| Description | Connector Housing 3 Position 2.5mm Pitch Single Row XH Series PA66 -25℃~+85℃ | Mfr. Part # | HC-XH-3Y-L-05 |
| Package | P=2.5mm | Model Number | HC-XH-3Y-L-05 |
This specification covers the 2.50mm pitch XH connector, double row type. It details product performance, test methods, and inspection requirements, suitable for various applications requiring reliable electrical connections.
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature Range | -25 85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 5. Material | ||
| Terminal | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Housing | Nylon66 UL94V-O, Color: White | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A | |
| Withstand voltage | No breakdown or flashover | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 5.5N | Mate connectors at a rate of 253mm per minute |
| Single contact Withdrawal force | 1.5N | Mate connectors at a rate of 253mm per minute |
| Terminal crimping Wire strength | 10N | Axial pullout force at 253mm per minute for AWG#22 wire |
| Pin Retention Force | 20N (AWG#22 wire) | Exerts a force on the pin end at a rate of 253mm per minute until the needle exits the seat |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity: Max 1 sec, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Measure contact temperature rise when maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature Cycling | Contact Resistance 40m, Insulation Resistance 1000m, No breakdown or flashover | One cycle: -553C for 30min, 853C for 30min, with 10-15min transition time. Total 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Concentration: 51%, Period: 24H |
| Solder ability | Area of soldering: 90 % | Solder temperature: 2455C, Immersion period: 3 0.5S |
| Manual soldering tin process | Appearance: No damage | Soldering time: 30.5S, Soldering pot: 3505 |
| Wave soldering tin soldering process | Appearance: No damage | Soldering time: 50.5S, Soldering pot: 260 5 C |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!