Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2mm |
| colour | 白色 |
| Number of Rows | 2 |
| With Wings | 不带翅 |
| Reference Series | - |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 8 |
| Number of Positions or Pins | 2x8P |
| With Locker | 不带锁扣 |
| Row Spacing | 2mm |
| Description | Connector Housing 16 Position 2mm Pitch Dual Row PA66 -25℃~+85℃ |
| Mfr. Part # | HC-PHB-2*8EY-05 |
| Package | P=2mm |
| Model Number | HC-PHB-2*8EY-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2mm |
| colour | 白色 | Number of Rows | 2 |
| With Wings | 不带翅 | Reference Series | - |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 8 | Number of Positions or Pins | 2x8P |
| With Locker | 不带锁扣 | Row Spacing | 2mm |
| Description | Connector Housing 16 Position 2mm Pitch Dual Row PA66 -25℃~+85℃ | Mfr. Part # | HC-PHB-2*8EY-05 |
| Package | P=2mm | Model Number | HC-PHB-2*8EY-05 |
The 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE is a series of connectors designed for electrical applications. It offers reliable performance, with specifications covering electrical, mechanical, and environmental characteristics. This connector is suitable for use with various wire gauges and PC board thicknesses, ensuring interchangeability with products of the same specification.
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, peeling, etc. | General Principles |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 2A AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 500V DC (rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 800V AC (rms) for 1 minute between adjacent terminals and ground of mate connectors, leakage current must be less than 0.5mA |
| 7. Mechanical Performance | ||
| Terminal crimping wire pullout force | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at a rate of 25 3mm per minute |
| Terminal and hole seat fixed force | 12N | Mate housing and terminals with wafer at a rate of 25 3mm per minute |
| Single contact withdrawal force | 0.3N | Terminal pulled out from the hole seat at a rate of 25 3mm per minute along the wire direction |
| Single contact insertion force | 5N | Pin end force applied at a rate of 25 3mm per minute |
| Pin Retention Force | 15N | Mate housing and terminals with wafer at a rate of 25 3mm per minute |
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity 1 micro second; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed | Connector in combined state |
| Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| Thermal Shock | Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover; Appearance: No damage | Cycle: -553 (30min) -> 10-15min room temp -> 853 (30min) -> 10-15min room temp. Total cycle: 5 cycles |
| Salt Spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Concentration: 51% (NaCl solution); Period: Stamping before tin plated for 24 hours or Stamping after tin plated for 8 hours |
| Solder Ability | Soldering area: 90 % | Solder temperature: 2455; Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Manual soldering: Soldering temperature: 350 5 ; Soldering time: 3 0.5S. Wave soldering: Soldering temperature: 260 5 C; Soldering time: 5 0.5S |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!