Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2.5mm |
| colour | 白色 |
| Number of Rows | 1 |
| With Wings | 不带翅 |
| Reference Series | XHB |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 4 |
| Number of Positions or Pins | 1x4P |
| With Locker | 带锁扣 |
| Row Spacing | - |
| Description | Connector Housing 4 Position 2.5mm Pitch Single Row XHB Series PA66 -25℃~+85℃ |
| Mfr. Part # | HC-XHB-4Y-05 |
| Package | P=2.5mm |
| Model Number | HC-XHB-4Y-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2.5mm |
| colour | 白色 | Number of Rows | 1 |
| With Wings | 不带翅 | Reference Series | XHB |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 4 | Number of Positions or Pins | 1x4P |
| With Locker | 带锁扣 | Row Spacing | - |
| Description | Connector Housing 4 Position 2.5mm Pitch Single Row XHB Series PA66 -25℃~+85℃ | Mfr. Part # | HC-XHB-4Y-05 |
| Package | P=2.5mm | Model Number | HC-XHB-4Y-05 |
This specification covers the 2.50mm pitch XHB connector, double row type. It details product performance, test methods, and inspection requirements for electrical connectors, designed for various applications.
| Category | Item | Specification | Test Method |
|---|---|---|---|
| General Principles | Scope | This specification content is applicable to 2.50 series strip connectors, including product performance, test methods and test requirements. | - |
| Applicable Standards | GB/T2421, GB/T2423, GB/T2424, GB/T5095 | - | |
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, not oxides and not peeled. | - | |
| Exchangeable | Exchangeable with same specification products. | - | |
| Use Condition | Ambient Temperature | -40 +105 | - |
| Applicable Wire Sizes | AWG #2228 | - | |
| Applicable PC board thickness | 1.6mm | - | |
| Material | Terminal Contact | Brass, Thickness 0.64mm, Tin plating: 2.55 m | - |
| Housing Plastic Wafer | LCP UL94V-0, Color: White | - | |
| Contact Pin | Brass, Thickness 0.64mm, Tin plating: 2.55 m, Color: Nature | - | |
| Housing Plastic Wafer (Right Angle/Horizontal) | Nylon66 UL94V-O, Color: White | - | |
| Housing Plastic Wafer (Right Angle/Vertical) | Nylon66 UL94V-O, Color: White | - | |
| Electrical Performance | Rated Voltage | 250V AC/DC | - |
| Rated Current | 3A AC/DC | - | |
| Withstand Voltage | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors | - | |
| Insulation Resistance | More than 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance | |
| Mechanical Performance | Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at a rate of 25 3mm per minute |
| Terminal and hole seat fixed force | 10N | Pullout force test at a rate of 25 3mm per minute | |
| Single contact insertion force | 5.5N | Inserting force test at a rate of 25 3mm per minute | |
| Seat pull-out force | 20N | Pullout force test until the needle exits at a rate of 253mm per minute | |
| Durability | Contact Resistance 40m , Appearance: No damage | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | |
| Environmental Performance | Thermal Aging | Contact Resistance 40m , Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Humidity | Contact Resistance 40m , Insulation Resistance 1000m , Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously | |
| Temperature Cycling | No breakdown or flashover | One cycle consists of -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!