Shenzhen ECER Network Technology Co., Ltd.
| Pitch | 2.54mm |
| Flame Retardant Rating | UL94V-0 |
| Number of Rows | 2 |
| colour | 黑色 |
| With Wings | 不带翅 |
| Reference Series | - |
| Operating Temperature | -25℃~+85℃ |
| Number of PINs Per Row | 15 |
| Plastic Material | PBT |
| Number of Positions or Pins | 2x15P |
| With Locker | 不带锁扣 |
| Row Spacing | - |
| Description | Connector Housing 30 Position 2.54mm Pitch Dual Row PBT -25℃~+85℃ |
| Mfr. Part # | HC-XG-2*15Y-05 |
| Package | P=2.54mm |
| Model Number | HC-XG-2*15Y-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Pitch | 2.54mm | Flame Retardant Rating | UL94V-0 |
| Number of Rows | 2 | colour | 黑色 |
| With Wings | 不带翅 | Reference Series | - |
| Operating Temperature | -25℃~+85℃ | Number of PINs Per Row | 15 |
| Plastic Material | PBT | Number of Positions or Pins | 2x15P |
| With Locker | 不带锁扣 | Row Spacing | - |
| Description | Connector Housing 30 Position 2.54mm Pitch Dual Row PBT -25℃~+85℃ | Mfr. Part # | HC-XG-2*15Y-05 |
| Package | P=2.54mm | Model Number | HC-XG-2*15Y-05 |
This specification covers the 2.54 series connector strip, including product performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for a wide range of electronic applications.
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxidation, and peeling. | General Principles |
| Dimension | According to drawings | According to drawings |
| Exchangeable | Exchangeable with same specification products. | - |
| 3. Use Condition | ||
| Ambient temperature Range | -25 85 | - |
| Applicable Wire Sizes | AWG #2226 | - |
| Applicable PC board thickness | 1.6mm | - |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | - |
| Rated Current | 3A AC/DC | - |
| Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | 20m (Initial value) | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 3.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | 10N (AWG#22) / 30N (AWG#24) / 20N (AWG#26) | Axial per minute to 25 3mm rate of the pullout force |
| Pin Retention Force | 10N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Interruption: 1 sec Max; Contact Resistance 40m | Amplitude 1.5mm p-p; Frequency :10-55-1O Hz/minute; Period: 2hour for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m | Temperature852; Period96 hours continuously |
| Constant Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m | Relative humidity90-95% (RH); Period96 hours continuously; Temperature:402 C |
| Temperature Cycling | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover | One cycle consists of -553C 30min, room temp 10-15min, 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Salt Spray | Appearance: No damage; Contact Resistance 40m | Temperature : 35 3 C; Concentration: 5 1 %; Period: 24H |
| Solder ability | Soldering area: 90 % | Solder temperature 245 5C; Immersion period:3 0.5S |
| Resistance to soldering heat (Wave soldering) | Appearance: No damage | Soldering temperature2605; Soldering time50.5S |
| Resistance to soldering heat (Manual soldering) | Appearance: No damage | Soldering pot3505; Soldering time30.5S |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!