Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2mm |
| colour | 白色 |
| Number of Rows | 2 |
| With Wings | 不带翅 |
| Reference Series | - |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 7 |
| Number of Positions or Pins | 2x7P |
| With Locker | 不带锁扣 |
| Row Spacing | 2mm |
| Description | Connector Housing 14 Position 2mm Pitch Dual Row PA66 -25℃~+85℃ |
| Mfr. Part # | HC-PHB-2*7EY-05 |
| Package | P=2mm |
| Model Number | HC-PHB-2*7EY-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2mm |
| colour | 白色 | Number of Rows | 2 |
| With Wings | 不带翅 | Reference Series | - |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 7 | Number of Positions or Pins | 2x7P |
| With Locker | 不带锁扣 | Row Spacing | 2mm |
| Description | Connector Housing 14 Position 2mm Pitch Dual Row PA66 -25℃~+85℃ | Mfr. Part # | HC-PHB-2*7EY-05 |
| Package | P=2mm | Model Number | HC-PHB-2*7EY-05 |
This specification document outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It covers product performance, test methods, and inspection requirements for this series of connectors.
| Item | Requirement | Test Mode |
| Electrical Performance | Rated Voltage: 250V AC/DC | |
| Rated Current: 2A AC/DC | ||
| Withstand Voltage: No breakdown or flashover | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance | |
| Contact Resistance: 20m (Initial value) | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. Does not include wire resistance. | |
| Insulation Resistance: 1000 M | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. | |
| Electrical Performance (Continued) | ||
| Contact Resistance: 40m (after Durability, Thermal Aging, Temperature Rise, Humidity, Thermal Shock, Salt Spray, Soldering Heat tests) | ||
| Mechanical Performance | Terminal crimping Wire strength: 50N (AWG#22), 30N (AWG#24), 20N (AWG#26), 13N (AWG#28) | Axial pullout force per contact at a rate of 25 3mm per minute |
| Single contact Withdrawal force: 12N | The terminal and the hole seat at a rate per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity. | |
| Fixed terminals And hole seat: 12N | ||
| Single contact insertion force: 5N | The housing together with the terminal ends with wafer matched at a rate per minute to 25 3mm inserting force test. | |
| Seat pull-out force: 15N | Exerts a force on the pin end at a rate per minute 253mm until the needle exit Seat pull-out force. | |
| Pin Retention Force: | ||
| Durability: 30 cycles | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. Contact Resistance 40m. | |
| Vibration | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Duration: 2 hours for each direction (X, Y, Z axes). Current discontinuity 1 sec. Contact Resistance 40m. | Mate connector combination state of the welding circuit board as test samples, resistance to vibration test. |
| Mechanical Performance (Continued) | ||
| Environmental Performance | Thermal Aging: Appearance: No damage, Contact Resistance 40m | Connector combination condition is placed in the accordance with the following specifications high temperature aging test after the test and measurement of contact resistance. Temperature: 852, Period: 96 hours continuously. |
| Temperature Rise: Measure contact temperature rise when maximum rated current is passed. | ||
| Humidity (Constant Humidity): Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m | Connector combination under the condition of constant temperature of the following specifications constant temperature and humidity test after the experiment measuring contact resistance insulation resistance and withstand voltage test. Relative humidity: 90-95% (RH), Period: 96 hours continuously. Temperature: 402 C. | |
| Thermal Shock: Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m, Withstand Voltage: No breakdown or flashover | One cycle consists of -553C 30min, room temp 10-15min. Total cycle: 5 cycles. 853C 30min, room temp 10-15min. | |
| Salt Spray: Appearance: No damage, Contact Resistance 40m | Temperature: 353C, Concentration: 51%, Period: Stamping before tin plated for 24 hours, Stamping after tin plated for 8 hours. | |
| Solder Ability: Soldering area: 90% | Solder temperature: 2455C, Immersion period: 3 0.5S. | |
| Soldering Heat Resistance | Manual Soldering: Resistance 40m | Soldering time: 30.5S, Soldering pot: 350 5C. Position DIP type needle solder conductor or a fixed piece at the end of the 1.5mm distance. |
| Wave Soldering: Resistance 40m | Soldering time: 50.5S, Soldering pot: 260 5C. | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!