Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2mm |
| colour | 白色 |
| Number of Rows | 2 |
| With Wings | 不带翅 |
| Reference Series | - |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 20 |
| Number of Positions or Pins | 2x20P |
| With Locker | 不带锁扣 |
| Row Spacing | 2mm |
| Description | Connector Housing 40 Position 2mm Pitch Dual Row PA66 -25℃~+85℃ |
| Mfr. Part # | HC-PHB-2*20EY-05 |
| Package | P=2mm |
| Model Number | HC-PHB-2*20EY-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2mm |
| colour | 白色 | Number of Rows | 2 |
| With Wings | 不带翅 | Reference Series | - |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 20 | Number of Positions or Pins | 2x20P |
| With Locker | 不带锁扣 | Row Spacing | 2mm |
| Description | Connector Housing 40 Position 2mm Pitch Dual Row PA66 -25℃~+85℃ | Mfr. Part # | HC-PHB-2*20EY-05 |
| Package | P=2mm | Model Number | HC-PHB-2*20EY-05 |
The 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE is a series of connectors designed for electrical applications. This specification document outlines the product's performance, test methods, and inspection requirements, ensuring interchangeability with similar specifications. It is suitable for use within an ambient temperature range of -25 to +85 and is designed for applicable wire sizes of AWG #22 to #28, with a recommended PC board thickness of 1.6mm.
| Item | Requirement | Test Mode |
| Electrical Performance | Rated Voltage: 250V AC/DC | |
| Rated Current: 2A AC/DC | ||
| Withstand Voltage: 800V AC (rms) for 1 minute, leakage current < 0.5mA | Apply 800V AC(rms)for I minute and the leakage current shall not exceed 0.5mA to the adjacent termina1 and ground of the mate connectors | |
| Insulation Resistance: >1000 M | Apply 500V DC(rms) for I minute between adjacent contacts to measure the insulation resistance | |
| Contact Resistance: 20m (Initial) | A maximum voltage of 20m V and maximum current of 1 OOmA are applied to the Mate connector | |
| Mechanical Performance | Terminal crimping Wire strength: >50N (AWG#22), >30N (AWG#24), >20N (AWG#26), >13N (AWG#28) | Axial pullout force per contact at 25 3mm/min |
| Fixed terminals And hole seat: >12N | Terminal and hole seat fixed force | |
| Single contact Withdrawal force: >0.3N | Terminal and hole seat withdrawal force along wire direction at 253mm/min | |
| Seat pull-out force: >15N | Pin retention force at pin end at 253mm/min | |
| Single contact insertion force: < 5N | Housing with terminal and wafer matched inserting force test at 253mm/min | |
| Durability: 30 cycles, Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test | |
| Vibration: Amplitude 1.5mm p-p, Frequency 10-55-1OHz/minute, 2 hours per direction (X, Y, Z axes), Contact Resistance 40m, Current Discontinuity < 1 sec | Mate connector combination state on PCB, vibration test | |
| Environmental Performance | Thermal Aging: Appearance: No damage, Contact Resistance 40m | Connector combination in oven at 852 for 96 hours |
| Temperature Rise: Measure conductor temperature rise with maximum rated current | Connector combination measure the temperature rise of contact when the maximum rated current is passed | |
| Humidity: Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m | Connector combination in constant temperature and humidity (402, 90-95% RH) for 96 hours | |
| Temperature Cycling: Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m, Withstand Voltage: No breakdown or flashover | One cycle: -553 (30min) to 853 (30min) with 10-15min transition, Total 5 cycles | |
| Salt Spray: Appearance: No damage, Contact Resistance 40m | Test samples in 51% salt spray at 353 for 8 hours (plated before stamping) or 24 hours (stamped before plating) | |
| Solderability & Resistance to Soldering Heat | Solder ability: Solder area 90% | Immersion in 2455 solder for 30.5S |
| Resistance to soldering heat: (Wave soldering) Soldering time: 50.5S, Soldering pot: 2605; (Hand soldering) Soldering time: 30.5S, Soldering pot: 3505 | Manual iron soldering process or wave soldering tin soldering process |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!