Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | - |
| Pitch | 2mm |
| colour | 黑色 |
| Number of Rows | 1 |
| With Wings | 不带翅 |
| Reference Series | PH |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PA66 |
| Number of PINs Per Row | 4 |
| Number of Positions or Pins | 1x4P |
| With Locker | 不带锁扣 |
| Row Spacing | - |
| Description | Connector Housing 4 Position 2mm Pitch Single Row PH Series PA66 -25℃~+85℃ |
| Mfr. Part # | HC-PH-4Y-B-05 |
| Package | P=2mm |
| Model Number | HC-PH-4Y-B-05 |
View Detail Information
Explore similar products
Dependable kinghelm KH-A2009-2X12Y component built for consistent performance in
Connector solution featuring HRS DF1B-22DEP-2.5RC 2.5mm pitch for discrete wire
HRS DF51K-2S-2C 800 connector optimized for automotive applications requiring
Wire to board crimp connector JST PAP 05V S with 2 millimeter pitch and
Product Specification
| Flame Retardant Rating | - | Pitch | 2mm |
| colour | 黑色 | Number of Rows | 1 |
| With Wings | 不带翅 | Reference Series | PH |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PA66 |
| Number of PINs Per Row | 4 | Number of Positions or Pins | 1x4P |
| With Locker | 不带锁扣 | Row Spacing | - |
| Description | Connector Housing 4 Position 2mm Pitch Single Row PH Series PA66 -25℃~+85℃ | Mfr. Part # | HC-PH-4Y-B-05 |
| Package | P=2mm | Model Number | HC-PH-4Y-B-05 |
This specification covers the 2.00MM PITCH PH CONNECTOR DOUBLE ROW TYPE, designed for electrical and electronic applications. It details product performance, test methods, and inspection requirements, ensuring interchangeability and reliability under specified environmental conditions.
| Item | Requirement | Test Mode |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | |
| Applicable Wire Sizes | AWG #2430 | |
| Applicable PC board thickness | 0.81.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| Dimension | According to drawings | |
| Interchangeability | Exchangeable with same specification products. | |
| 6. Electrical Performance | ||
| Rated Current | 2A AC/DC | |
| Rated Voltage | 100V AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 1000V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping wire strength | 30N (AWG#24), 20N (AWG#26), 13N (AWG#28), 8N (AWG#30) | Axial pullout force at 25 3mm/min |
| Single contact Withdrawal force | 2N | Axial pullout force at 25 3mm/min |
| Fixed terminals And hole seat | 12N | Pullout force at 25 3mm/min along the wire direction |
| Single contact insertion force | 10N | Inserting force test at 25 3mm/min |
| Seat pull-out force | 12N | Force applied to pin end until needle exits seat at 253mm/min |
| Pin Retention Force | ||
| Durability | Contact Resistance 40m | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Appearance: No damage; Contact Resistance 40m; Current Discontinuity: Max 1 micro second | Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axes) |
| 8. Environmental Performance | ||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m | Temperature: 852; Period: 96 hours continuously |
| Temperature Rise | Measure contact temperature rise when maximum rated current is passed | |
| Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m | Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| Temperature cycling | No breakdown or flashover | One cycle: -553C for 30min, then 853C for 30min, with 10-15min transition time. Total 5 cycles. |
| Salt spray | Appearance: No damage; Contact Resistance 40m | Temperature: 353; Concentration: 51% Salt Solution; Period: Stamping after tin plated for 8 hours / Stamping before tin plated for 24 hours |
| Solder ability | Soldering Area: 90% | Solder temperature: 2455C; Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Wave soldering: 260 5C, 5 0.5S; Hand soldering: 350 5C, 3 0.5S |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!