Shenzhen ECER Network Technology Co., Ltd.
| Description | SMD,P=0.5mm Arrays, Edge Type, Mezzanine (Board to Board) RoHS |
| Mfr. Part # | BTB050080-F1D08200 |
| Package | SMD,P=0.5mm |
| Model Number | BTB050080-F1D08200 |
View Detail Information
Explore similar products
Comprehensive mating guide including 3M P50-026S-R1-EA for wire to board copper
BTB connector solution JMEconn 5001-BTB0840-14FR-00 series 5001 with flexible
Pak 10 Plug 3M PK10-050PM-S-DA Connector 1 mm Pitch Surface Mount with Straight
Female BTB Connector 30 Pin Height Reel Packing JMEconn 5001-BTB0830-30FR-00 for
Product Specification
| Description | SMD,P=0.5mm Arrays, Edge Type, Mezzanine (Board to Board) RoHS | Mfr. Part # | BTB050080-F1D08200 |
| Package | SMD,P=0.5mm | Model Number | BTB050080-F1D08200 |
This product specification outlines the performance, testing, and quality requirements for the 0.5mm/0.8mm Pitch Side-inserted BOARD to BOARD SMD Type Connector. Designed for reliable electrical, mechanical, and environmental performance, this connector is manufactured by SHENZHEN ATOM TECHNOLOGY CO.,LTD.
| Category | Specification Item | Requirement | Procedure/Conditions |
|---|---|---|---|
| ELECTRICAL REQUIREMENT | Contact Resistance | 60m Max. | Mate connectors, measure by dry circuit, 20mV Max., 100mA Max. (EIA-364-23) |
| Insulation Resistance | 800M Min. | Unmated connectors, apply 500V DC between adjacent terminals or ground. (EIA-364-21) | |
| Dielectric withstanding Voltage | No Breakdown (Current leakage: 1 mA max.) | Unmated connectors, apply 500V AC for 1 minute between adjacent circuits. (EIA-364-20) | |
| Temperature Rising | 30 Max. | Under rated current. Measure temperature rise of contact points when passing maximum AC rated current. (EIA-364-70 METHOD 2) | |
| MECHANICAL REQUIREMENT | Contact Retention Force | 0.03Kgf/Pin {0.294N} Min. | Mate connectors, apply load at a speed of 253mm/minute. |
| Insertion Force | 0.08KgfxN Max. (N=Pins) | Mate connectors soldered on a board, insert and separate at speed of 253mm/min. (EIA-364-13) | |
| Durability (30 cycles) | Appearance | No Damage | Mate and unmate at a speed of 253 mm/min. (EIA-364-09) |
| Contact Resistance | 90m Max. | (After Durability Test) | |
| Vibration | Contact Resistance: 90m Max. Appearance: No Damage Discontinuity: 1 sec Max. | Mate connectors, subject to vibration (1.5mm P-P, 10~55~10 Hz for 1 min) for 2 hours in each of 3 axes, passing DC 1mA. (EIA-364-28 Condition I) | |
| ENVIRONMENT PERFORMANCE AND OTHERS | Heat Resistance | Appearance: No Damage Contact Resistance: 90m Max. | Expose to 105 2 for 96 hours, then condition at ambient room for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 90m Max. | Expose to -402 for 96 hours, then condition at ambient room for 1-2 hours. | |
| Humidity | Contact Resistance: 90m Max. Dielectric Strength: No Breakdown Appearance: No Damage Insulation Resistance: 500M Min. | Expose to 402, 90~95% RH for 96 hours, then condition at ambient room for 1-2 hours. | |
| Salt Spray | Appearance: No Damage | 352, 51% salt spray: Sn plated area (12 hrs), Au plated area 1-3u" (24 hrs), Au plated area 5u" (48 hrs). Clean with water and dry. | |
| Solder ability | Solder Wetting | 95% of immersed area must show no voids, pinholes. | Immerse tip of solder tails into molten solder (2455) up to 0.1mm from Housing for 30.5 seconds. (EIA-364-52) |
| Resistance to soldering heat | Appearance | No Damage after 2 times of reflow. | Reflow profile: Peak 2605, Pre-heat 150~180. (Refer to reflow temperature profile) |
| Ratings | Voltage rating | 60V DC | |
| Current rating | 0.5A Max. (Each Pin) | ||
| Operating/Storage Conditions | Operating Temperature | -40 to +105 (Including terminal temperature rise) | |
| Operating Humidity range | 93% Max. Relative humidity | ||
| Storage temperature range | 208 | ||
| Storage Humidity range | 60% Max. Relative humidity | ||
| Product Dimensions (Example: BTB0.5mm 2*40P Dual Row Female Connector with Post) | Overall Height (H) | 4.0mm 0.15mm | Measured value: 4.00mm |
| Pitch | 0.50mm 0.05mm | Measured value: 0.51mm, 0.50mm |
Note: Dimensions and specific test results are based on provided sample data and may vary.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!