Shenzhen ECER Network Technology Co., Ltd.
| Row Spacing | 2.54mm |
| Operating Temperature | -40℃~+105℃ |
| Color | 黑色 |
| Current Rating | 3A |
| Contact Plating | 金 |
| Contact Material | 黄铜 |
| Number of Positions or Pins | 2x5P |
| Voltage Rating (Max) | 250V |
| Number of PINs Per Row | 5 |
| Number of Rows | 2 |
| Pitch | 2.54mm |
| Connector Type | 简牛座 |
| Mounting Type | 直插 |
| Description | Connector IDC Header Through Hole 10 position 2.54mm |
| Mfr. Part # | B05A10E-C133-B |
| Package | Through Hole,P=2.54mm |
| Model Number | B05A10E-C133-B |
View Detail Information
Explore similar products
2 mm IDC Wiremount Socket 3M 37304-A165-0PE MB Mini-Clamp II Series with
Versatile JST 03SR-3S connector designed for disconnectable wire termination in
Wire To Board Connector DLL XG-20A Featuring 2.54 Millimeter Pitch And Multiple
mini clamp socket 3M 37308-3101-0W0 FL with plug latch acceptance and UL 94V-0
Product Specification
| Row Spacing | 2.54mm | Operating Temperature | -40℃~+105℃ |
| Color | 黑色 | Current Rating | 3A |
| Contact Plating | 金 | Contact Material | 黄铜 |
| Number of Positions or Pins | 2x5P | Voltage Rating (Max) | 250V |
| Number of PINs Per Row | 5 | Number of Rows | 2 |
| Pitch | 2.54mm | Connector Type | 简牛座 |
| Mounting Type | 直插 | Description | Connector IDC Header Through Hole 10 position 2.54mm |
| Mfr. Part # | B05A10E-C133-B | Package | Through Hole,P=2.54mm |
| Model Number | B05A10E-C133-B |
This product specification covers the requirements for performance and test methods of a 2.54mm Pitch Box Header Connector. Designed for reliable electrical connections, it operates within specified voltage, current, and temperature ranges. The connector adheres to industry standards for electrical properties, mechanical strength, and environmental resistance, ensuring consistent performance in various applications. This product is confirmed to contain no RoHS-banned materials.
| Category | Specification | Test Method | Requirements |
|---|---|---|---|
| Ratings | Voltage | - | 250 Volts AC (RMS) {or 30 Volts DC} |
| Current | - | 3.0 Amps | |
| Operating Temperature | - | -40C to +105C | |
| Humidity Range | - | Relative humidity below 90% RH | |
| Performance | Appearance | Visual, method of measurement | Conform to the requirements of the drawings |
| Low Level Contact Resistance | EIA 364-23 (Mate connectors: apply a maximum voltage of 20 mV and a current of 100 mA) | 20 milliohms Max | |
| Insulation Resistance | EIA 364-21 (Unmate & unmount connectors: apply a voltage of 500 VDC Between adjacent terminals and between terminals to ground) | 1000 Megohms Min | |
| Dielectric Withstanding Voltage | EIA 364-20 (Un-mate connectors: apply a voltage of 1000 volts VAC for 1 minute between adjacent terminals and between terminals to ground) | No breakdown; current leakage < 0.5 mA | |
| Mechanical Requirements | Pin retention force | EIA 364-13 (Push pin from insulator base at speed 25.43 mm per minute) | 7N/Pin Min |
| Durability | EIA 364-09 (Connector shall be subjected to 100 cycles of insertion and withdrawal) | Contact resistance: 50 milliohms Max | |
| Solderability | EIA 364-52 (After one hour steam aging. Temperature of the wetting: 2605Sn: Lead Free Time: 3 0. 5S) | The surface of the portion to be soldered shall at least 95% covered with new solder | |
| Environmental Requirements | Humidity | EIA 364-31A, 402;90~95%RH;96hours (measurement must be taken within 30 min. after tested) | 1). No damage 2). Less than twice of initial dielectric strength |
| Heat aging | EIA 364-17 (Test Condition 2: 105 +/- 2, 96hours) | 1). No damage | |
| Resistance To Solder Heat | MIL-STD-202F, Method 210A, Test 1 (Wave Soldering Temperature: 255 +/- 5, Time: 3~5 sec) | 1). No damage | |
| Salt spray test | EIA 364-26 (The temperature: 351, Solution:51%, Time: 12H) | 1). No damage 2). Contact Resistance:50 milliohms Max 3). Insulation Resistance:1000 Megohms Min |
Packing details can be found in the packing diagram. Reflow conditions are not specified in detail but are available.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!