Shenzhen ECER Network Technology Co., Ltd.
| Row Spacing | 2.54mm |
| Operating Temperature | -25℃~+85℃ |
| Current Rating | 3A |
| Contact Plating | 金 |
| Contact Material | 黄铜 |
| Voltage Rating (Max) | 250V |
| Number of Positions or Pins | 2x13P |
| Number of PINs Per Row | 13 |
| Number of Rows | 2 |
| Pitch | 2.54mm |
| Connector Type | 牛角扣 |
| Mounting Type | 直插 |
| Description | Connector IDC Header Through Hole 26 position 2.54mm |
| Mfr. Part # | HC-XG-2*13A-05 |
| Package | Through Hole,P=2.54mm |
| Model Number | HC-XG-2*13A-05 |
View Detail Information
Explore similar products
2 mm IDC Wiremount Socket 3M 37304-A165-0PE MB Mini-Clamp II Series with
Versatile JST 03SR-3S connector designed for disconnectable wire termination in
Wire To Board Connector DLL XG-20A Featuring 2.54 Millimeter Pitch And Multiple
mini clamp socket 3M 37308-3101-0W0 FL with plug latch acceptance and UL 94V-0
Product Specification
| Row Spacing | 2.54mm | Operating Temperature | -25℃~+85℃ |
| Current Rating | 3A | Contact Plating | 金 |
| Contact Material | 黄铜 | Voltage Rating (Max) | 250V |
| Number of Positions or Pins | 2x13P | Number of PINs Per Row | 13 |
| Number of Rows | 2 | Pitch | 2.54mm |
| Connector Type | 牛角扣 | Mounting Type | 直插 |
| Description | Connector IDC Header Through Hole 26 position 2.54mm | Mfr. Part # | HC-XG-2*13A-05 |
| Package | Through Hole,P=2.54mm | Model Number | HC-XG-2*13A-05 |
This specification covers the 2.54mm pitch XG connector double row type, including product performance, test methods, and inspection requirements. Designed for various electronic applications, these connectors offer reliable performance and durability.
| Item | Requirement | Test Mode |
| 1. Scope | ||
| This specification applies to the 2.54 series connector strip, covering product performance, test methods, and inspection requirements. | ||
| 2. Applicable Standards | ||
| GB/T2421 | Electrical Connectors Environmental Testing - Part 1: General | |
| GB/T2423 | Electrical Connectors Environmental Testing | |
| GB/T2424 | Electrical Connectors Environmental Testing Guidelines | |
| GB/T5095 | Basic Testing Rules and Measurement Methods for Components of Electrical Equipment | |
| 3. Use Condition | ||
| Ambient Temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2226 | |
| Applicable PC Board Thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defects, dirt, cracks, or mechanical damage; contacts without rust, plating oxidation, or peeling. | |
| Dimension | According to drawings | |
| Interchangeability | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze, 0.22mm thick; Brass, 0.64mm thick. Finish: Local gold plating (3m or 2m). | |
| Housing Plastic | PBT UL94V-O. Color: Black or White. | |
| Wafer | PBT UL94V-O. Color: Black. | |
| Contact Pin | Brass, 0.64mm thick. Finish: Half gold plated (3m). | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand Voltage | 1000V AC (rms) for 1 minute between adjacent contacts; leakage current < 0.5mA. | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. |
| Contact Resistance | 20m (initial value) | A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector (does not include wire resistance). |
| Insulation Resistance | 1000 M | Apply 500V DC (rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| 7. Mechanical Performance | ||
| Single Contact Insertion Force | 3.5N | Housing together with terminal ends with wafer matched at a rate of 253mm/min inserting force test. |
| Single Contact Withdrawal Force | 0.39N | Terminal and hole seat matched at a rate of 253mm/min along the wire direction, pulled out from the hole seat. |
| Terminal Crimping Wire Strength | 10N (AWG#22), 30N (AWG#24), 50N (AWG#26) | Axial pullout force at the terminal crimped wire at a rate of 253mm/min. |
| Pin Retention Force | 10N | Force exerted on the pin end at a rate of 253mm/min until the needle exits the seat. |
| Vibration | Current Discontinuity: 1 sec Max. Contact Resistance: 40m | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/min; Duration: 2 hours for each direction (X, Y, Z). |
| Durability | Contact Resistance: 40m | Mate connectors up 30 cycles at a maximum rate of 10 cycles/min prior to environmental test. |
| 8. Environmental Performance | ||
| Thermal Aging | Contact Resistance: 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously. |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed. | Connector combination condition is placed in a heating oven. |
| Constant Humidity | Contact Resistance: 40m; Insulation Resistance: 1000m; Appearance: No damage | Temperature: 402; Relative Humidity: 90-95% RH; Period: 96 hours continuously. |
| Temperature Cycling | No breakdown or flashover. | One cycle: -553 (30min) to 853 (30min), with 10-15min transition time. Total cycles: 5. |
| Salt Spray | Contact Resistance: 40m; Appearance: No damage | Temperature: 353; Concentration: 51%; Period: 24H. |
| Solder Ability | Soldering Area: 90% | Solder temperature: 2455; Immersion period: 30.5S. |
| Resistance to Soldering Heat | Appearance: No damage | Wave soldering: Pot temp 2605, Time 50.5S. Hand soldering: Pot temp 3505, Time 30.5S. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!