Shenzhen ECER Network Technology Co., Ltd.
| Row Spacing | 2.54mm |
| Operating Temperature | -25℃~+85℃ |
| Current Rating | 3A |
| Contact Plating | 金 |
| Contact Material | 黄铜 |
| Voltage Rating (Max) | 250V |
| Number of Positions or Pins | 2x8P |
| Number of PINs Per Row | 8 |
| Number of Rows | 2 |
| Pitch | 2.54mm |
| Connector Type | 牛角扣 |
| Mounting Type | 弯插 |
| Description | Connector IDC Header Through Hole, Right Angle 16 position 2.54mm |
| Mfr. Part # | HC-XG-2*8AW-05 |
| Package | Through Hole,Right Angle,P=2.54mm |
| Model Number | HC-XG-2*8AW-05 |
View Detail Information
Explore similar products
2 mm IDC Wiremount Socket 3M 37304-A165-0PE MB Mini-Clamp II Series with
Versatile JST 03SR-3S connector designed for disconnectable wire termination in
Wire To Board Connector DLL XG-20A Featuring 2.54 Millimeter Pitch And Multiple
mini clamp socket 3M 37308-3101-0W0 FL with plug latch acceptance and UL 94V-0
Product Specification
| Row Spacing | 2.54mm | Operating Temperature | -25℃~+85℃ |
| Current Rating | 3A | Contact Plating | 金 |
| Contact Material | 黄铜 | Voltage Rating (Max) | 250V |
| Number of Positions or Pins | 2x8P | Number of PINs Per Row | 8 |
| Number of Rows | 2 | Pitch | 2.54mm |
| Connector Type | 牛角扣 | Mounting Type | 弯插 |
| Description | Connector IDC Header Through Hole, Right Angle 16 position 2.54mm | Mfr. Part # | HC-XG-2*8AW-05 |
| Package | Through Hole,Right Angle,P=2.54mm | Model Number | HC-XG-2*8AW-05 |
This specification covers the 2.54mm pitch XG connector double row type, including product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections within a specified temperature range and wire gauge.
| Item | Requirement | Test Method |
| Scope | This specification applies to the 2.54 series connector strip, covering product performance, test methods, and inspection requirements. | |
| Applicable Standards | GB/T2421, GB/T2423, GB/T2424, GB/T5095 | |
| Use Condition | Ambient temperature: -25 +85 Applicable wire size: AWG #2226 Applicable PC board thickness: 1.6mm | |
| Appearance & Dimension | Appearance: Product surface without defects, dirt, cracks, or mechanical damage; contacts without rust, plating oxidation, or peeling. Dimension: According to drawings. Interchangeable: With same specification products. | |
| Material | Terminal Contact: Phosphor bronze (0.22mm thick), Brass (0.64mm thick) Housing Plastic: PBT UL94V-O Finish: Partial gold plating (2m, 3m) | |
| Electrical Performance | Rated Voltage: 250V AC/DC Rated Current: 3A AC/DC Withstand Voltage: 1000V AC (rms) for 1 minute between adjacent contacts, leakage current < 0.5mA. Contact Resistance: 20m (initial value) Insulation Resistance: 1000 M (after 500V DC for 1 minute between adjacent contacts) | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector (does not include wire resistance). |
| Mechanical Performance | Single Contact Insertion Force: 3.5N Single Contact Withdrawal Force: 0.39N Terminal & Hole Seat Fixing Force: 15N Terminal Crimping Wire Strength: AWG#22 50N, AWG#24 30N, AWG#26 20N. Pin Retention Force: 10N. Durability: 30 cycles, Contact Resistance 40m. | Housing together with terminal ends with wafer matched at a rate per minute to 253mm inserting force test. Terminal and hole seat mating force test. Terminal crimping wire axial pullout force test. Exerts a force on the pin end at a rate per minute 253mm until the needle exit. Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Environmental Performance | Thermal Aging: 852 for 96 hours, Contact Resistance 40m. Temperature Rise: Measure contact temperature rise at maximum rated current. Constant Humidity: 402, 90-95% RH for 96 hours, Contact Resistance 40m, Insulation Resistance 1000m. Temperature Cycling: -553 (30min) to 853 (30min), 5 cycles, Contact Resistance 40m, Insulation Resistance 1000m, Withstand Voltage (no breakdown/flashover). Salt Spray: 353, 51% concentration for 24H, Contact Resistance 40m. Solder Ability: Solder temperature 2455, Immersion period 30.5S. Resistance to Soldering Heat: Wave soldering (2605, 50.5S), Manual soldering (3505, 30.5S). | Connector combination condition is placed in a high-temperature aging test oven. Measure the temperature rise of contact when the maximum rated current is passed. Connector placed in constant temperature and humidity chamber. Thermal shock test. Salt spray test. Solderability test. Resistance to soldering heat test. |
| Vibration | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Duration: 2 hours each axis (X, Y, Z). Current Interruption: 1 sec Max. Contact Resistance 40m. | Vibration test on mated connector soldered to PCB. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!