Shenzhen ECER Network Technology Co., Ltd.
| Description | P=2.54mm Free Hanging, Panel Mount RoHS |
| Mfr. Part # | HC-XG-2*17Y-05 |
| Package | P=2.54mm |
| Model Number | HC-XG-2*17Y-05 |
View Detail Information
Explore similar products
2 mm IDC Wiremount Socket 3M 37304-A165-0PE MB Mini-Clamp II Series with
Versatile JST 03SR-3S connector designed for disconnectable wire termination in
Wire To Board Connector DLL XG-20A Featuring 2.54 Millimeter Pitch And Multiple
mini clamp socket 3M 37308-3101-0W0 FL with plug latch acceptance and UL 94V-0
Product Specification
| Description | P=2.54mm Free Hanging, Panel Mount RoHS | Mfr. Part # | HC-XG-2*17Y-05 |
| Package | P=2.54mm | Model Number | HC-XG-2*17Y-05 |
This specification covers the 2.54mm pitch XG connector double row type, including product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections.
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxides and not peeled. | General Principles |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature Range | -40 +105 | |
| Applicable Wire Sizes | AWG #2226 | |
| Applicable PC board thickness | 1.6mm | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze, Brass | Material: Phosphor bronze thickness 0.22mm, Brass thickness 0.64mm. Finish: Half the gold plated 2u/3u |
| Housing Plastic | PBT UL94V-0 | Color: Black, White |
| Contact | Plastic Wafer | Type: Straight Pin (A), Bent Pin (AW) |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute between adjacent contacts |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts |
| 7. Mechanical Performance | ||
| Single contact insertion force | 3.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a react per minute to 253mm along the write direction, are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | 10N (AWG#22) / 20N (AWG#26) | Axial per minute to 25 3mm rate of the pullout force |
| Pin Retention Force | 50N (AWG#22) / 30N (AWG#24) / 20N (AWG#26) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Vibration | Current interruption: 1 sec Max | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000M, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature cycling | No breakdown or flashover | One cycle consists of -403C 30min, room temp 10-15min, 1053C 30min, room temp 10-15min. Total cycle: 5 cycles |
| Salt spray | Contact Resistance 40m, Appearance: No damage | Temperature: 353C, Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90 % | Solder temperature: 2455C, Immersion period: 30.5S |
| Resistance to soldering heat | Appearance: No damage | Wave soldering: Soldering temperature: 2605C, Soldering time: 50.5S. Manual soldering: Soldering temperature: 3505C, Soldering time: 30.5S. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!