Shenzhen ECER Network Technology Co., Ltd.
| Row Spacing | 2.54mm |
| Operating Temperature | -25℃~+85℃ |
| Current Rating | 3A |
| Contact Plating | 金 |
| Contact Material | 黄铜 |
| Voltage Rating (Max) | 250V |
| Number of Positions or Pins | 2x8P |
| Number of PINs Per Row | 8 |
| Number of Rows | 2 |
| Pitch | 2.54mm |
| Connector Type | 牛角扣 |
| Mounting Type | 直插 |
| Description | Connector IDC Header Through Hole 16 position 2.54mm |
| Mfr. Part # | HC-XG-2*8A-05 |
| Package | Through Hole,P=2.54mm |
| Model Number | HC-XG-2*8A-05 |
View Detail Information
Explore similar products
2 mm IDC Wiremount Socket 3M 37304-A165-0PE MB Mini-Clamp II Series with
Versatile JST 03SR-3S connector designed for disconnectable wire termination in
Wire To Board Connector DLL XG-20A Featuring 2.54 Millimeter Pitch And Multiple
mini clamp socket 3M 37308-3101-0W0 FL with plug latch acceptance and UL 94V-0
Product Specification
| Row Spacing | 2.54mm | Operating Temperature | -25℃~+85℃ |
| Current Rating | 3A | Contact Plating | 金 |
| Contact Material | 黄铜 | Voltage Rating (Max) | 250V |
| Number of Positions or Pins | 2x8P | Number of PINs Per Row | 8 |
| Number of Rows | 2 | Pitch | 2.54mm |
| Connector Type | 牛角扣 | Mounting Type | 直插 |
| Description | Connector IDC Header Through Hole 16 position 2.54mm | Mfr. Part # | HC-XG-2*8A-05 |
| Package | Through Hole,P=2.54mm | Model Number | HC-XG-2*8A-05 |
This specification covers the 2.54 series connector strip, including product performance, test methods, and inspection requirements. Designed for various applications, these connectors ensure reliable electrical connections.
| Item | Requirement | Test Method |
| Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand Voltage | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| Contact Resistance | 20m (Initial value) | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Mechanical Performance | ||
| Single contact insertion force | 3.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | 10N (AWG#22), 20N (AWG#24), 30N (AWG#26) | Axial per minute to 25 3mm rate of the pullout force |
| Pin Retention Force | 50N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity: 1 sec Max, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2hour for each direction (X, Y, Z axis) |
| Environmental Performance | ||
| Thermal Aging | Appearance: No damage, Contact Resistance 40m | Temperature: 852, Period: 96 hours continuously |
| Constant Humidity | Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature Cycling | Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m, Withstand Voltage: No breakdown or flashover | One cycle consists of -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Salt Spray | Appearance: No damage, Contact Resistance 40m | Temperature: 353C, Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90% | Solder temperature: 2455C, Immersion period: 30.5S |
| Resistance to Soldering Heat (Wave Soldering) | Appearance: No damage | Soldering temperature: 2605C, Soldering time: 50.5S |
| Resistance to Soldering Heat (Manual Soldering) | Appearance: No damage | Soldering temperature: 3505C, Soldering time: 30.5S |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!