Shenzhen ECER Network Technology Co., Ltd.
| Flame Retardant Rating | UL94V-0 |
| Reference Series | PH |
| Pins Structure | 1x5P |
| Contact Plating | 锡 |
| Contact Material | 黄铜;PA66 |
| Pitch | 2mm |
| Voltage Rating (Max) | 250V |
| Number of PINs Per Row | 5 |
| Number of Rows | 1 |
| Row Spacing | - |
| Mounting Type | 直插 |
| Operating Temperature | -25℃~+85℃ |
| Description | Connector Header 5 position 2mm Pitch 2A Through Hole -25℃~+85℃ |
| Mfr. Part # | PH-5A |
| Package | Through Hole,P=2mm |
| Model Number | PH-5A |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Flame Retardant Rating | UL94V-0 | Reference Series | PH |
| Pins Structure | 1x5P | Contact Plating | 锡 |
| Contact Material | 黄铜;PA66 | Pitch | 2mm |
| Voltage Rating (Max) | 250V | Number of PINs Per Row | 5 |
| Number of Rows | 1 | Row Spacing | - |
| Mounting Type | 直插 | Operating Temperature | -25℃~+85℃ |
| Description | Connector Header 5 position 2mm Pitch 2A Through Hole -25℃~+85℃ | Mfr. Part # | PH-5A |
| Package | Through Hole,P=2mm | Model Number | PH-5A |
This specification covers the PH series connector strip, including product performance, test methods, and inspection requirements. It is applicable to 2.00MM PITCH PH CONNECTOR DOUBLE ROW TYPE, Part No.: HC-PH - ****.
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating not oxides and not peeled. | General Principles |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature Range | -25 85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze, 0.2mm thick; Tin plating: 35 m | ROHS Material |
| Housing Plastic | Nylon66 UL94V-O; Color: White | Plastic Wafer |
| Contact Pin | Brass, 0.50mm thick; Tin plating: 2.55 m; Color: Beige | Contact |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 2A AC/DC | |
| Withstand voltage | 800V AC (rms) for 1 minute between adjacent contacts and ground. Leakage current must be less than 0.5mA. | Apply 800V AC(rms)for I minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. No breakdown or flashover. |
| Contact Resistance | Initial value 20 | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. Does not include wire resistance. |
| Insulation Resistance | More than 1000 M | Apply 500V DC (rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| 7. Mechanical Performance | ||
| Single contact insertion force | 6N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Single contact Withdrawal force | 15N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity. |
| Terminal crimping Wire strength | AWG#22: 50N AWG#24: 30N AWG#26: 20N AWG#28: 13N | Terminal crimping wire Axial per minute to 25 3mm rate of the pullout force. |
| Pin Retention Force | 15N (per contact) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force. |
| Durability | Contact Resistance 30m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Vibration | Current Discontinuity: Max 1 sec; Contact Resistance 30m | Amplitude: 1.5mm p-p; Direction: X, Y, Z axes; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction. |
| 8. Endurance Characteristics (Environmental Performance) | ||
| Thermal Aging | Appearance: No damage; Contact Resistance 30m | Temperature: 852; Period: 96 hours continuously. |
| Temperature Rise | Measure temperature rise of contact when the maximum rated current is passed. | Connector combination condition is placed in the accordance with the following specifications high temperature aging test after the test and measurement of contact resistance. |
| Constant Humidity | Appearance: No damage; Contact Resistance 30m; Insulation Resistance 500m | Temperature: 402 C; Relative humidity: 90-95% (RH); Period: 96 hours continuously. |
| Temperature Cycling | Appearance: No damage; No breakdown or flashover. | -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Salt Spray | Appearance: No damage; Contact Resistance 30m | Temperature: 353 C; Concentration: 51% NaCl Solution; Period: Stamping before tin plated for 24 hours (contact area), Stamping after tin plated for 8 hours. |
| Solder ability | Area of soldering: 90 % | Solder temperature: 2455C; Immersion period: 3 0.5S. |
| Resistance to soldering heat | Appearance: No damage; Contact Resistance 30m | Manual soldering: Soldering time: 30.5S; Soldering temperature: 3505; Position: 1.5mm from conductor end. Wave soldering: Soldering time: 50.5S; Soldering temperature: 2305. |
| 9. Packaging, Transport, Storage | ||
| Transport | Avoid direct rain/snow and sun exposure. Can be transported by any means. | Transport temperature: -20 +50. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!