Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Interface | 内孔 |
| RF Series | - |
| Connector Type | 板端 |
| Style | - |
| Operating Temperature | -40℃~+85℃ |
| Frequency | 6GHz |
| Impedance | 50Ω |
| Interface Diameter | 2.1mm |
| Description | Connector Receptacle Female Pin 50Ω Surface Mount |
| Mfr. Part # | MM8430-2610RB3 |
| Package | SMD |
| Model Number | MM8430-2610RB3 |
View Detail Information
Explore similar products
Brass gold plated communication assembly with insulator pin pins and rear plug
Professional grade kinghelm KH-MMCX-K510-Z connector cable suitable for
Crimp Non Solder TNC Male Connector L com EZ 600 TM X LC for Laboratory and
High Voltage 50 Ohm Male Clamp Coaxial Connector L-com ANM-2602 with Brass
Product Specification
| Number of Ports | 1 | Interface | 内孔 |
| RF Series | - | Connector Type | 板端 |
| Style | - | Operating Temperature | -40℃~+85℃ |
| Frequency | 6GHz | Impedance | 50Ω |
| Interface Diameter | 2.1mm | Description | Connector Receptacle Female Pin 50Ω Surface Mount |
| Mfr. Part # | MM8430-2610RB3 | Package | SMD |
| Model Number | MM8430-2610RB3 |
This product specification applies to the SWD type receptacle, a microwave switch coaxial connector. It is designed for applications requiring specific electrical and mechanical performance ratings. Please contact the manufacturer for usage in applications not described herein.
| Item | Specification | Test Method/Conditions |
|---|---|---|
| Ratings | ||
| Voltage Rating | 250V r.m.s. maximum | |
| Nominal Frequency Range | DC to 6GHz | |
| Nominal Impedance | 50 | |
| Temperature Rating | -40C to +90C | |
| Electrical Performance | ||
| Insulation Resistance | 500 M minimum | MIL-STD-202, Method 302 (DC 250V+/-25V, 1min) |
| Withstanding Voltage | No evidence of breakdown | MIL-STD-202, Method 301 (AC 300V+/-20V r.m.s, 1min) |
| Contact Resistance | Initial: 50m max. (60m max.)*1 | MIL-STD-1344 Method 3002.1 (1,000Hz, 150mA max., 200V max. voltage drop) |
| After test: 120m max. (130m max.)*1 | ||
| Voltage Standing Wave Ratio (V.S.W.R.) | 1.2 max. (DC3GHz) 1.3 max. (3GHz 6GHz) | Frequency: 0.1GHz to 6.0GHz |
| Isolation | 20dB min. (DC3GHz) 15dB min. (3GHz 6GHz) | Frequency: 0.1GHz to 6.0GHz |
| Insertion Loss | 0.1dB max. (DC3GHz) 0.2dB max. (3GHz 6GHz) | Frequency: 0.1GHz to 6.0GHz |
| Mechanical Performance | ||
| Engage and Disengage Force | Engagement: 30N maximum Disengagement: 5N minimum - 40N maximum | |
| Connector Durability | No evidence of visual or mechanical damage and meet contact resistance and engage/disengage force specifications. | 500 cycles of mating and withdrawal at 12 cycles/min maximum. |
| Adhered Force of Electrode Terminal | No excoriation of electrode terminal. | Force: 50N, Time: 5s+/-1s, Direction: Vertical against PCB, Solder: Sn-3.0Ag-0.5Cu, Thickness: 150m |
| Strength of PCB Bending | No excoriation of electrode terminal. | PCB Thickness: 1.6mm, Speed: 1.0mm/s, Bend: 1.0mm, Time: 30s, Solder: Sn-3.0Ag-0.5Cu, Thickness: 150m |
| Solderability | At least 95% covered by a continuous new solder coating. | MIL-STD-202, Method 208 (Solder: Sn-3.0Ag-0.5Cu, Flux: Rosin 25%, IPA 75%, Temperature: 245C, Time: 3s) |
| Resistance to Soldering Heat | No evidence of mechanical damage, and meet insulation resistance, withstanding voltage and contact resistance specifications. | Reflow soldering by FIGURE 8. Measurement after 24h+/-2h. |
| Environmental Performance | ||
| Moisture Resistance | No evidence of mechanical damage, and meet insulation resistance, withstanding voltage and contact resistance specifications. | MIL-STD-202, Method 103, Test Condition B (Temperature: 60C, Humidity: 95% RH, Time: 96h) |
| Thermal Shock | No evidence of mechanical damage, and meet insulation resistance, withstanding voltage and contact resistance specifications. | MIL-STD-202, Method 107 (50 cycles: -40C to 90C) |
| Vibration | No electrical interruption exceeding 10s and no evidence of visual or mechanical damage and meet the requirement of the center contact resistance. | 3 mutually perpendicular directions, Sweep: 10Hz100Hz10Hz (20 min) |
| Mechanical Shock | No electrical interruption exceeding 10s and no evidence of visual or mechanical damage and meet the requirement of the center contact resistance. | MIL-STD-202, Method 213, Test Condition B (Acceleration: 750m/s, Peak Duration: 6ms, Waveform: Half-sine) |
| Dimensions | ||
| Carrier Tape Dimensions | See FIGURE 4. | |
| Reel Dimensions | See FIGURE 5. | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!