Shenzhen ECER Network Technology Co., Ltd.
| Description | Through Hole Circular Connector Assemblies RoHS |
| Mfr. Part # | XLR-25-N3B |
| Package | Through Hole |
| Model Number | XLR-25-N3B |
View Detail Information
Explore similar products
Durable RoHS Compliant Connector CAX XLR-19ZP-7P Suitable for Electronic
Amphenol PT06E-12-4P SR Connector Designed for Communications Geophysical and
Panel Mount Socket Connector CAZN M12-P8A-GPFM12 European Standard M12 Series
Rear Mount Socket Plastic Waterproof Connector Pin Type PCB Board Mount CAZN E7T
Product Specification
| Description | Through Hole Circular Connector Assemblies RoHS | Mfr. Part # | XLR-25-N3B |
| Package | Through Hole | Model Number | XLR-25-N3B |
This specification applies to XLR jacks used in electronic products. The product offers rated voltage and current of 50V AC, 6A, and operates within a practical temperature range of -30 to +80 and a humidity range of 85% RH.MAX. It is designed for applications requiring reliable electrical and mechanical performance.
| Item | Property | Test Condition | Performance |
|---|---|---|---|
| 2. Rated / | Practical temperature range | N/A | -30 to +80 |
| Humidity range | N/A | 85% RH.MAX. | |
| 2-2. Preservation temperature range | Preservation temperature range | N/A | -10 to +40 |
| Humidity range | N/A | 85% RH.MAX. | |
| Storage Period | Surrounding air without acid, alkaline or other corrosive gases | Not exceed 180 days | |
| 2-3. Rated voltage and current(MAX.) | Rated voltage and current | N/A | 50V AC , 6A |
| 2-4. Appearance | Appearance | N/A | No scratches, soil, rust or discoloration on the surface. |
| 4. Electrical efficiency / | Withstand Voltage | AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds | 10000 M Min. | |
| 4-3 Contact Resistance | Contact Resistance | Voltage maximum 20mV, current maximum 100mA between a pair of matched terminals | 30 m MAX. |
| 5. Mechanical Performance | Insertion and withdrawal forces | Rate of insertion/withdrawal: 2 mm/s | Insertion: 35 N max. Withdrawal: 2 N min. |
| Terminal Strength | 0.5 kgf for 10 seconds | No looseness, damage, etc., but terminal deformation is acceptable. | |
| 6. Durability / | Life test | Rotate and then plug in/out with a matching plug for 1000 times at a frequency of 5 times per minute (no load) | Appearance: No obvious change. Contact resistance: less than 50 m. |
| 7. Solderability / | Resistance to soldering heat | Solder temperature: 2603. Dip time: 51 seconds. | Plastic base should not be deformed and terminals should not fall off. |
| Solderability | Solder temperature: 2453C. Time of dip: 30.5 seconds. | Coating of solder area should be more than 95%. | |
| 8. Environment test / | Cold test | -30 3 C for 96 hours, then 1 hour under standard conditions | Appearance: No obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| Heat test | 802 for 96 hours, then 1 hour under standard conditions | N/A (Performance not fully detailed for this condition in source) | |
| Humidity test | 403, 90% ~ 95% RH for 96 hours, then 1 hour under standard conditions | Appearance: No obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | |
| 8-4 Temperature Cycling | Temperature Cycling | Conditions as shown in drawing (not provided) | N/A |
| 8-5 Salt spray test | Salt spray test | Temperature: 35 2, Solution: 5 1%, Spray time: 24 hours | No obvious rust in the appearance. |
| 9. Test condition / | Standard Test Conditions | Temperature: 15C to 35C, Humidity: 25% to 85%, Pressure: 86 kPa to 106 kPa | N/A |
| Doubtful Judgment Conditions | Temperature: 201C, Humidity: 63% to 67%, Pressure: 86 kPa to 106 kPa | N/A |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!