Shenzhen ECER Network Technology Co., Ltd.
| Description | Through Hole Circular Connector Assemblies RoHS |
| Mfr. Part # | XLR-23FW |
| Package | Through Hole |
| Model Number | XLR-23FW |
View Detail Information
Explore similar products
Durable RoHS Compliant Connector CAX XLR-19ZP-7P Suitable for Electronic
Amphenol PT06E-12-4P SR Connector Designed for Communications Geophysical and
Panel Mount Socket Connector CAZN M12-P8A-GPFM12 European Standard M12 Series
Rear Mount Socket Plastic Waterproof Connector Pin Type PCB Board Mount CAZN E7T
Product Specification
| Description | Through Hole Circular Connector Assemblies RoHS | Mfr. Part # | XLR-23FW |
| Package | Through Hole | Model Number | XLR-23FW |
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. It details the electrical, mechanical, durability, and environmental performance requirements for these connectors.
| Item | Property | Test Condition | Performance |
| 2. Rated / | Practical temperature range | -30 to +80 | |
| Humidity range | 85% RH.MAX. | ||
| Preservation temperature range | -10 to +40 | ||
| Humidity range | 85% RH.MAX. (No Acid Alkaline Or Other Corrosive Airs. Storage Period Not Exceed 180 Days) | ||
| Rated voltage and current (MAX.) | 250V AC, 15A (continuous); 30A audio signal, duty cycle 50% | ||
| 2-4. Appearance | No scratches, soil, rust or discoloration on the surface. | ||
| 4. Electrical efficiency / | Withstand Voltage | Withstand AC 4000V (50/60Hz RMS) between two non-contact terminals for 1 minute. | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 1000 M Min. | |
| Contact Resistance | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA). | 30 m MAX. | |
| 5. Mechanical Performance | Terminal Strength | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc., but terminal deformation is acceptable. |
| 6. Durability / | Life test | Under no load, plug in/out with a matching plug for 5000 times at a frequency of 5 times per minute. | Appearance: No obvious change or destruction. |
| Contact resistance: less than 50 m. | |||
| 7. Solderability / | Resistance to soldering heat | Dip terminal in solder at 2603 for 51 seconds. | Plastic base should not be deformed, and terminals should not fall off. |
| Solderability | Dip in solder at 2453C for 30.5 seconds. | Solder coating area should be more than 95%. | |
| 8. Environment test / | Cold test | Place housing at -30 3 C for 96 hours, then under standard conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| Heat test | Store housing at 802 for 96 hours, then under standard conditions for 1 hour. | ||
| Humidity test | Store housing at 403 with 90% ~ 95% RH for 96 hours, then under standard conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | |
| Temperature Cycling | Conditions as shown in drawing (not provided), then at room temperature for 30 minutes. | ||
| Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment. | No obvious rust in the appearance. | |
| 9. Test condition / | Standard: 15C~35C, 25%~85% RH, 86kPa~106kPa. If doubts arise: 201C, 63%~67% RH, 86kPa~106kPa. | ||
| 10. Amendment / | Amendments require negotiation and agreement between manufacturer and customer. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!