Shenzhen ECER Network Technology Co., Ltd.
| Description | Through Hole Circular Connector Assemblies RoHS |
| Mfr. Part # | XLR-19-7P |
| Package | Through Hole |
| Model Number | XLR-19-7P |
View Detail Information
Explore similar products
Durable RoHS Compliant Connector CAX XLR-19ZP-7P Suitable for Electronic
Amphenol PT06E-12-4P SR Connector Designed for Communications Geophysical and
Panel Mount Socket Connector CAZN M12-P8A-GPFM12 European Standard M12 Series
Rear Mount Socket Plastic Waterproof Connector Pin Type PCB Board Mount CAZN E7T
Product Specification
| Description | Through Hole Circular Connector Assemblies RoHS | Mfr. Part # | XLR-19-7P |
| Package | Through Hole | Model Number | XLR-19-7P |
This specification applies to XLR jack (Combo) connectors used in electronic products. These connectors offer reliable electrical and mechanical performance for various applications.
| Item | Property | Test Condition | Performance |
| 1. Scope | Applicable to XLR jack (Combo) for electronic products. | ||
| 2. Rated Values | Practical Temperature Range | -30 to +80 | |
| Humidity Range (Practical) | 85% RH MAX. | ||
| Preservation Temperature Range | -10 to +40 | ||
| Humidity Range (Preservation) | 85% RH MAX. | ||
| Storage Conditions | Ambient air free of acid, alkaline, or corrosive gases. Storage period not exceeding 180 days. | ||
| Rated Voltage and Current (MAX.) | 50V AC, 3A (Type A) / 7.5A (Type B) | ||
| Appearance | No scratches, soil, rust, or discoloration on the surface. | ||
| 3. Construction | Outline and Dimension | Should match attachment drawing. | |
| Part and Material | Should be consistent with material list specifications. | ||
| 4. Electrical Efficiency | Withstand Voltage | AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute. | No dielectric breakdown. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds. | 10000 M Min. | |
| Contact Resistance | Measure tail end of matched terminals (Voltage max 20mV, Current max 100mA). | 30 m MAX. | |
| 5. Mechanical Performance | Insertion and Withdrawal Forces | Rate: 2 mm/s. No latching or retaining device effect. | XLR: Insertion: 35 N max. Withdrawal: 2 N min. JACK: Insertion: 40 N max. Withdrawal: 5 N min. |
| Terminal Strength | Withstand a force of 0.5 kgf for 10 seconds. | No looseness or damage. Terminal deformation acceptable. | |
| 6. Durability | Life Test | Under no load, rotate and plug/unplug with matching plug for 1000 cycles at 5 cycles/minute. | Appearance: No obvious change or destruction. Contact Resistance: Less than 50 m. |
| 7. Solderability | Resistance to Soldering Heat | Terminal dipped in solder at 2603 for 51 seconds. | Plastic base not deformed, terminals not detached. |
| Solderability | Solder temperature: 2453C. Dip time: 30.5 seconds. | Coating of solder area: >95%. | |
| 8. Environment Test | Cold Test | Housing at -30 3 C for 96 hours, then 1 hour under standard conditions. | Appearance: No obvious change. Contact Resistance: 50 m. Insulation Resistance: 500 M. Withstand Voltage: AC 1000V. |
| Heat Test | Housing at 802 for 96 hours, then 1 hour under standard conditions. | (Performance details not fully specified in this section, implied to be within acceptable limits) | |
| Humidity Test | Housing at 403, 90%~95% RH for 96 hours, then 1 hour under standard conditions. | Appearance: No obvious change. Contact Resistance: 50 m. Insulation Resistance: 500 M. Withstand Voltage: AC 1000V. | |
| Temperature Cycling | Conditions shown in drawing (not provided), then 30 minutes at room temperature. | (Performance details not fully specified) | |
| Salt Spray Test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry. | Appearance: No obvious rust. | |
| 9. Test Condition | Standard Conditions | Temperature: 15C to 35C, Humidity: 25% to 85%, Pressure: 86 kPa to 106 kPa. | |
| Doubtful Judgment Conditions | Temperature: 201C, Humidity: 63% to 67%, Pressure: 86 kPa to 106 kPa. | ||
| 10. Amendment | Procedure | Requires negotiation and agreement between manufacturer and customer. | |
| 12. Types | XLR JACK (Combo) Type | Type A, Type B |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!