Shenzhen ECER Network Technology Co., Ltd.
| Y-Width of Bottom Edge on Board | 4.25mm |
| Reference Series | GH |
| Pins Structure | 1x4P |
| Contact Plating | 锡 |
| Contact Material | 磷青铜;LCP |
| Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | UL94V-0 |
| Pitch | 1.25mm |
| Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 4 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 8.3mm |
| Z-Height of the Board | 4.05mm |
| Row Spacing | - |
| Mounting Type | 立贴 |
| Description | Connector Header 4 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃ |
| Mfr. Part # | GH125-S04CCA-00 |
| Package | SMD,P=1.25mm |
| Model Number | GH125-S04CCA-00 |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Y-Width of Bottom Edge on Board | 4.25mm | Reference Series | GH |
| Pins Structure | 1x4P | Contact Plating | 锡 |
| Contact Material | 磷青铜;LCP | Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | UL94V-0 | Pitch | 1.25mm |
| Voltage Rating (Max) | 50V | Number of PINs Per Row | 4 |
| Number of Rows | 1 | X-Length of Bottom Edge on Board (Spacing Line) | 8.3mm |
| Z-Height of the Board | 4.05mm | Row Spacing | - |
| Mounting Type | 立贴 | Description | Connector Header 4 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃ |
| Mfr. Part # | GH125-S04CCA-00 | Package | SMD,P=1.25mm |
| Model Number | GH125-S04CCA-00 |
The GH125-S**CCA-00 is a 1.25mm pitch wafer patch socket connector designed for FPC/FFC applications. It offers reliable electrical and mechanical performance, adhering to ROHS environmental requirements.
| Item | Specification | Condition | Requirement |
|---|---|---|---|
| 2. Product Name and Part Number | |||
| Product Name | WAFER | ||
| Part Number | GH125-S**CCA-00 | ||
| 3. Ratings | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | 1A [AC/DC (Virtual value) 50Hz] | ||
| Ambient temperature Range | -45 +85 | (Including terminal temperature rise) | |
| 6. Performance | |||
| 6.1 Electrical Performance | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter to measure both terminals of the connector form a closed loop between. | 20 m MAX | |
| Insulation Resistance | Plug in the connector and apply 500V DC voltage between the adjacent contacts and between the contacts and the enclosure for 1 minute. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown | |
| 6.2 Mechanical Performance | |||
| Pin fixing force | Fix the pin holder on the drawing machine and apply force on the front end of the pin at a rate of 253mm per minute until the pin is withdrawn from the pin holder. | Single pin | 5N MIN |
| Terminal Retention in Plastic parts | The terminal shall be matched with the hole seat, and at the rate of 253mm per minute along the conductor direction, the force that the terminal is pulled out of the socket. | Single terminal | 5N MIN |
| 6.3 Environmental Performance | |||
| Heat Resistance | Place the connector in an environment of +852 for 96H, take it out and test after 1-2H in normal environment. | 852, 96 hour | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Cold Resistance | Place the connector in an environment of -452 for 96H, take it out and test after 1-2H in normal environment. | -452, 96 hour | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Humidity | Place the connector in an environment of 452, relative humidity 90~96% for 96H. After the test, take it out and test after 1~2H in normal environment. | Temperature: 452 Relative Humidity: 90-96% Duration: 96 Hours | Appearance: No Damage; Insulation Resistance: 30M MIN; Dielectric Strength: 500V AC/MIN |
| Temperature Cycling | Test samples are placed in a high and low temperature test chamber and adjusted according to the following steps: a) Maintain at -453 for 30 minutes; b) Maintain at normal temperature and humidity for 1H; c) Maintain at 853 for 30 minutes; d) Maintain at normal temperature and humidity for 1H; a to d is one cycle, a total of 5 cycles. Recover in normal environment for 2H before inspection. | a)-453 30minutes; b)Normal temp/humidity 1H; c)853 30minutes; d)Normal temp/humidity 1H, 5 cycles. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Salt Spray Resistance | Test samples are suspended from the top of the test chamber; 48 hours of exposure to a salt spray from a 5 1% solution at 452. After the test, rinse with water at room temperature and then dry at room temperature. | 48 hours exposure to a salt spray from the 5 1% solution at 452. | Appearance: No Damage, Corrosion |
| Salt Spray Resistance | Test samples are suspended from the top of the test chamber; 484 hours of exposure to a salt spray from a 51% solution at 452. After the test, rinse with water at room temperature and then dry at room temperature. | 484 hours exposure to a salt spray from the 51% solution at 452. | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Solder Ability | Immerse the sample's soldering surface into a tin bath at 2455 for 2.50.5 sec. | Soldering Time: 2.50.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. | Tin Area: Above 95% |
| Soldering Resistance | Place the connector on a PCB board and immerse it into a tin bath at 2605 for 50.5 sec. | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip. | Appearance: No Damage, Deformation; Tin Area: Above 95% |
| 7. Appearance and Size | |||
| Appearance | The surface of plastic parts shall be free of obvious scars, mottled, cracked, burr, flash, lack of material and deformation affecting the use; the surface of metal parts shall be smooth and clean, no rust, oxidation, peeling, blackening and obvious mechanical damage. | ||
| Size | Refer to engineering drawing | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!