Shenzhen ECER Network Technology Co., Ltd.
| Y-Width of Bottom Edge on Board | 5.95mm |
| Reference Series | XH |
| Pins Structure | 1x4P |
| Contact Plating | 锡 |
| Contact Material | 黄铜;LCP |
| Operating Temperature | -20℃~+85℃ |
| Flame Retardant Rating | UL94V-0 |
| Pitch | 2.5mm |
| Voltage Rating (Max) | 250V |
| Number of PINs Per Row | 4 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 12.5mm |
| Z-Height of the Board | 7.9mm |
| Row Spacing | - |
| Mounting Type | 立贴 |
| Description | Connector Header 4 position 2.5mm Pitch 3A Surface Mount,Vertical -20℃~+85℃ |
| Mfr. Part # | AFC25-S04CCA-00 |
| Package | SMD,P=2.5mm |
| Model Number | AFC25-S04CCA-00 |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Y-Width of Bottom Edge on Board | 5.95mm | Reference Series | XH |
| Pins Structure | 1x4P | Contact Plating | 锡 |
| Contact Material | 黄铜;LCP | Operating Temperature | -20℃~+85℃ |
| Flame Retardant Rating | UL94V-0 | Pitch | 2.5mm |
| Voltage Rating (Max) | 250V | Number of PINs Per Row | 4 |
| Number of Rows | 1 | X-Length of Bottom Edge on Board (Spacing Line) | 12.5mm |
| Z-Height of the Board | 7.9mm | Row Spacing | - |
| Mounting Type | 立贴 | Description | Connector Header 4 position 2.5mm Pitch 3A Surface Mount,Vertical -20℃~+85℃ |
| Mfr. Part # | AFC25-S04CCA-00 | Package | SMD,P=2.5mm |
| Model Number | AFC25-S04CCA-00 |
This product acknowledgment document details the specifications for the 2.5mm vertical SMT connector, model AFC25-S**CCA-00. It outlines standard ratings, packaging, transportation, storage, component details, electrical characteristics, and environmental and mechanical properties.
| Item | Specifications | Requirements |
| Standard Rating | ||
| Rated Voltage | 250V | |
| Rated Current | 3.0A AC/DC | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Packing | ||
| Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport | ||
| Allowed by any means, avoid rain, snow and sunlight, no mechanical damage such as collision and extrusion. Transport ambient temperature: -20 to +50. | ||
| Storage | ||
| Ambient temperature: -20 to +50, relative humidity not more than 90%, no acid, alkaline and other corrosive gases. | ||
| Component Name / Material | ||
| Part Name | Model | Material |
| Base | 2.5 | LCP E130i |
| Pin | 2.5 | Brass |
| Stator | 2.5 | Brass |
| Appearance and Size | ||
| Appearance: Plastic parts surface should be free of obvious scars, mottled, cracked, burr, flash, lack of material and deformation affecting use. Metal parts surface should be smooth and clean, no rust, oxidation, peeling, blackening and obvious mechanical damage. Size: Refer to engineering drawing. | ||
| Electrical Characteristics | ||
| Contact Resistance | Test Method: Measure between two terminals of the connector after plugging in. | 20m Max |
| Insulation Resistance | Test Method: Apply 1000V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute after plugging in. | 1000M Min |
| Withstand Voltage | Test Method: Apply 1000V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute after plugging in. | No breakdown and flashover |
| Environmental Characteristics | ||
| Heating Test | Test Method: Plugged connector in +1052 for 96H, then placed in normal environment for 1~2H before testing. | Appearance: no damage. Contact Resistance: 30m Max |
| Cold Tolerance Test | Test Method: Plugged connector in -252 for 96H, then placed in normal environment for 1~2H before testing. | Appearance: no damage. Contact Resistance: 30m Max |
| Moisture Resistance Test | Test Method: Plugged connector in 402, 90~96% RH for 96H, then placed in normal environment for 1~2H before testing. | Appearance: no damage. Insulation Resistance: 500M Min. Withstand Voltage: 800V AC/minute MIN |
| Temperature Cycle | Test Method: 5 cycles of -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover 2H in normal environment before inspection. | Appearance: no abnormality. Contact Resistance: 30m Max |
| Salt Spray Test | Test Method: Continuous spray with 51% NaCl solution for 24H. Wash with distilled water and recover 1~2H at normal temperature. | Appearance: no damage or corrosion. Contact Resistance: 30m Max |
| Weldability | Test Method: Dip the part to be welded into 2455 tin solution for 2.50.5 seconds. | Tin area above 95% |
| Soldering Resistance | Test Method: Place connector on PCB and reflow at 2605 for 51S or wave soldering. | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| Mechanical Properties | ||
| Pin Fixing Force | Test Method: Fix pin holder on drawing machine, apply force at 253mm/min until pin withdraws. | Single pin: 12N Min |
| Terminal Retention in Plastic Parts | Test Method: Pull terminal out of socket at 253mm/min along conductor direction. | Single terminal: 15N Min |
| Mechanical Life | Test Method: Plug and unplug 50 times at 10 times/min under no power. | Contact Resistance: 30m Max |
| Insertion/Extraction Force | Test Method: Fit socket and terminal, test insertion/extraction on the same axis with needle seat (lock removed). Speed: 205mm/min. | See table below for specific force requirements per position. |
| Insertion/Extraction Force (N) | |||||
| Position | Insert | Pull Out | Position | Insert | Pull Out |
| 1 | 16.00 | 2.00 | 9 | 48.00 | 24.00 |
| 2 | 20.00 | 10.00 | 10 | 52.00 | 26.00 |
| 3 | 24.00 | 12.00 | 11 | 56.00 | 28.00 |
| 4 | 28.00 | 14.00 | 12 | 60.00 | 30.00 |
| 5 | 32.00 | 16.00 | 13 | 64.00 | 32.00 |
| 6 | 36.00 | 18.00 | 14 | 68.00 | 34.00 |
| 7 | 40.00 | 20.00 | 15 | 72.00 | 36.00 |
| 8 | 44.00 | 22.00 | 16 | 76.00 | 38.00 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!