Shenzhen ECER Network Technology Co., Ltd.
| Y-Width of Bottom Edge on Board | 3.76mm |
| Pins Structure | 1x10P |
| Reference Series | SH |
| Contact Plating | 锡 |
| Contact Material | 磷青铜;LCP |
| Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | UL94V-0 |
| Pitch | 1mm |
| Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 10 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 12.3mm |
| Z-Height of the Board | 4.4mm |
| Row Spacing | - |
| Mounting Type | 立贴 |
| Description | Connector Header 10 position 1mm Pitch 500mA Surface Mount,Vertical -25℃~+85℃ |
| Mfr. Part # | AFC10-S10PCA-00 |
| Package | SMD,P=1mm |
| Model Number | AFC10-S10PCA-00 |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Y-Width of Bottom Edge on Board | 3.76mm | Pins Structure | 1x10P |
| Reference Series | SH | Contact Plating | 锡 |
| Contact Material | 磷青铜;LCP | Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | UL94V-0 | Pitch | 1mm |
| Voltage Rating (Max) | 50V | Number of PINs Per Row | 10 |
| Number of Rows | 1 | X-Length of Bottom Edge on Board (Spacing Line) | 12.3mm |
| Z-Height of the Board | 4.4mm | Row Spacing | - |
| Mounting Type | 立贴 | Description | Connector Header 10 position 1mm Pitch 500mA Surface Mount,Vertical -25℃~+85℃ |
| Mfr. Part # | AFC10-S10PCA-00 | Package | SMD,P=1mm |
| Model Number | AFC10-S10PCA-00 |
This product acknowledgment document details the 1.0mm pitch vertical SMT connector, model AFC10-S**PCA-00, manufactured by SHENZHEN JUSHUO ELECTRONIC CO.,LTD. It outlines the product's specifications, testing procedures, and performance requirements, ensuring compliance with industry standards and customer confirmation.
| Item | Specifications | Test Method | Performance Requirement |
|---|---|---|---|
| 2. Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 0.5A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| 7. Part Name/Material | |||
| Part Name | Model | Material | |
| Base | 1.0 LCP E130i | ||
| Reed | 1.0 | Phosphor copper | |
| Stator | 1.0 | Phosphor copper | |
| 9. Electrical Characteristics | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100M Min | |
| Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| 10. Environmental Characteristics | |||
| Heating Test | Place in +1052 for 96H. | Appearance: No damage. Contact Resistance: 30m Max | |
| Cold Tolerance Test | Place in -252 for 96H. | Appearance: No damage. Contact Resistance: 30m Max | |
| Moisture Resistance Test | Place in 402, 90-96% RH for 96H. | Appearance: No damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min | |
| Temperature Cycle | 5 cycles of -253 (30min), Room Temp (1H), +1053 (30min), Room Temp (1H). | Appearance: No abnormalities. Contact Resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H. | Appearance: No damage or corrosion. Contact Resistance: 30m Max | |
| Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering Resistance | Reflow solder at 2605 for 51s or wave solder. | Plastic parts: No obvious deformation, damage, or blistering. Electrical characteristics must meet specifications. | |
| 11. Mechanical Properties | |||
| PIN Fixing Force | Apply force at 253mm/min until pin withdraws. | Single PIN: 7N Min | |
| Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min along wire direction. | Single terminal: 5N Min | |
| Mechanical Life | Plug and unplug 50 times at 10 times/min without power. | Contact Resistance: 30m Max | |
| Insert Force/Draw Force | Test at 205mm/minute. | See table for PIN count specific values. | |
Insert/Draw Force Table:
| PIN | Insert (N) | Pull Out (N) | PIN | Insert (N) | Pull Out (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!