Shenzhen ECER Network Technology Co., Ltd.
| Y-Width of Bottom Edge on Board | 4.25mm |
| Reference Series | GH |
| Pins Structure | 1x5P |
| Contact Plating | 锡 |
| Contact Material | 磷青铜;LCP |
| Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | UL94V-0 |
| Pitch | 1.25mm |
| Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 5 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 9.55mm |
| Z-Height of the Board | 4.05mm |
| Mounting Type | 卧贴 |
| Row Spacing | - |
| Description | Connector Header 5 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | GH125-S05DCA-00 |
| Package | SMD,P=1.25mm,Surface Mount,Right Angle |
| Model Number | GH125-S05DCA-00 |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Y-Width of Bottom Edge on Board | 4.25mm | Reference Series | GH |
| Pins Structure | 1x5P | Contact Plating | 锡 |
| Contact Material | 磷青铜;LCP | Operating Temperature | -25℃~+85℃ |
| Flame Retardant Rating | UL94V-0 | Pitch | 1.25mm |
| Voltage Rating (Max) | 50V | Number of PINs Per Row | 5 |
| Number of Rows | 1 | X-Length of Bottom Edge on Board (Spacing Line) | 9.55mm |
| Z-Height of the Board | 4.05mm | Mounting Type | 卧贴 |
| Row Spacing | - | Description | Connector Header 5 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | GH125-S05DCA-00 | Package | SMD,P=1.25mm,Surface Mount,Right Angle |
| Model Number | GH125-S05DCA-00 |
This document is a product acknowledgment for the 1.25mm pitch horizontal surface mount connector with latch, model GH125-S**DCA-00. It details the product's specifications, performance characteristics, and testing procedures to ensure quality and compliance.
| Item | Specifications | Test Method | Performance Requirements |
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 1.0A AC/DC | ||
| Operating Temperature Range | -2585 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Environmental Protection | |||
| Compliance | Products in line with ROHS environmental protection requirements. | ||
| Packing | |||
| Method | Inner packing is joint and several, outer packing is carton. Product is sealed in the box, do not shake. | ||
| Transport | |||
| Conditions | Allowed by any means, avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | ||
| Storage | |||
| Conditions | Ambient temperature: -20 to +50, relative humidity 90%. No acid, alkaline, or other corrosive gases in the surrounding air. | ||
| Part Name/Material | |||
| Base | GH LCP E130i | ||
| Pin | GH Phosphor copper | ||
| Stator | GH Phosphor copper | ||
| Appearance | |||
| Plastic Parts | Free of obvious scars, mottled, cracked, burr, flash, lack of material, and deformation affecting use. | ||
| Metal Parts | Smooth, clean, no rust, oxidation, peeling, blackening, or obvious mechanical damage. | ||
| Electrical Characteristics | |||
| Contact Resistance | 20m Max | Plug in connector, test with contact resistance meter. | |
| Insulation Resistance | 500M Min | Plug in connector, apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | |
| Withstand Voltage | No breakdown and flashover | Plug in connector, apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | |
| Environmental Characteristics | |||
| Heating Test | Appearance: no damage. Contact Resistance: 60m Max | Plug connector in +852 for 96H, then in normal environment for 1-2H. | |
| Cold Tolerance Test | Appearance: no damage. Contact Resistance: 60m Max | Plug connector in -252 for 96H, then in normal environment for 1-2H. | |
| Moisture Resistance Test | Appearance: no damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN. | Place plug connector in 402, 90-96% RH for 96H, then in normal environment for 1-2H. | |
| Temperature Cycle | Appearance: no abnormality. Contact Resistance: 60m Max | 5 cycles of -253 (30min) -> Room Temp (1H) -> +853 (30min) -> Room Temp (1H). Recover 2H. | |
| Salt Spray Test | Appearance: no damage or corrosion. Contact Resistance: 60m Max | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover 1-2H. | |
| Weldability | Tin area above 95% | Dip welded part in 2605 tin solution for 2.50.5 seconds. | |
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics meet specifications. | Place connector on PCB, reflow or wave solder at 2605 for 51S. | |
| Mechanical Properties | |||
| Pin Fixing Force | Single pin 5N min | Fix pin holder, apply force on pin front end at 253mm/min rate until pin withdraws. | |
| Terminal Retention in Plastic Parts | Single terminal: 7N min | Match terminal with hole seat, pull terminal out at 253mm/min along wire direction. | |
| Mechanical Life | Contact Resistance: 80m Max | Plug and unplug 30 times at 10 times/min without power. | |
| Terminal Crimp Wire Strength | 26AWG wire: 17.8N. 28AWG wire: 8.9N. 30AWG wire: 4.4N. 32AWG wire: 2.2N. | Axial pullout force at 253mm/min rate. | |
| Insertion/Pullout Force | Insertion force: 2N(Per pin). Pullout force: 0.3N(Per pin). | Fit hole seat and terminal, insert/remove on same axis. Remove lock of hole seat. Test speed: 205mm/min. | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!