Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Interface | 内针 |
| RF Series | IPEX |
| Connector Type | 板端 |
| Frequency | 6GHz |
| Impedance | 50Ω |
| Interface Diameter | 1.4mm |
| Description | Connector Receptacle IPEX Male Pin 50Ω Surface Mount |
| Mfr. Part # | A-IPEX3-0.85A |
| Package | SMD |
| Model Number | A-IPEX3-0.85A |
View Detail Information
Explore similar products
Brass gold plated communication assembly with insulator pin pins and rear plug
Professional grade kinghelm KH-MMCX-K510-Z connector cable suitable for
Crimp Non Solder TNC Male Connector L com EZ 600 TM X LC for Laboratory and
High Voltage 50 Ohm Male Clamp Coaxial Connector L-com ANM-2602 with Brass
Product Specification
| Number of Ports | 1 | Interface | 内针 |
| RF Series | IPEX | Connector Type | 板端 |
| Frequency | 6GHz | Impedance | 50Ω |
| Interface Diameter | 1.4mm | Description | Connector Receptacle IPEX Male Pin 50Ω Surface Mount |
| Mfr. Part # | A-IPEX3-0.85A | Package | SMD |
| Model Number | A-IPEX3-0.85A |
This product specification defines the performance and test methods for the RF coaxial connector, designed and manufactured by TREASURE ADVANCE ENTERPRISES LIMITED. The connector is designed to meet electrical, mechanical, and environmental performance requirements as specified.
| Item | Requirements | Test Methods |
| 1. Examination of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| 2. Contact Resistance (Low Level) | Inner contact :20m Max. Initial Ground contact :20m Max. Initial | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. |
| 3. Insulation Resistance | 500 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (100 V DC10%). |
| 4. Dielectric Strength | Connector must withstand test potential of 100 VAC for 1 minute. Current leakage must be 0.5 mA max. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301. |
| 5. Unmating Force | Total unmate force: Initial 5N min. after 30 cycles 3Nmin. | Unmate the receptacle at a speed 253mm/m by the push-on/pull-off machine. |
| 6. Durability (Repeated Mating/Unmating) | Contact Resistance: 30m Max. after testing | Mate and unmate connector for 30 cycle. |
| 7. Crimp strength | 10N min | Pull the cable as shown at a speed 253mm/m by tensile strength machine. |
| 8. Vibration Sinusoidal Low Frequency | No electrical discontinuity greater then 1 sec (s) shall occur. Contact resistance:30 m max. | Subject mated connector to 10-55-10 Hz traversed in 1 minute at 1.5 mm amplitude 2 hours each of 3 mutually perpendicular plane, 10 mA applied MIL-STD-202, Method 201. |
| 9. Thermal shock | No damage, Contact Resistance (Low Level) (Final) 30 m max. | Temperature range from -55C to +85C. Start from -55C, after 30 min. change to +85C; change time is no more than 30 seconds. Total 5 cycles. MIL-STD-202, Method 107D, condition A. |
| 10. Humidity | No damage, Contact Resistance (Low Level) (Final) 30 m max.. Dielectric Strength should be OK, Insulation Resistance should be 200 M min. | Temperature :402C 96 hours. Relative Humidity : 90-95%; Duration :96 Hours. MIL-STD-202, Method 103. |
| 11. Salt Spray | Contact Resistance (Low Level) (Final)100 mmax. | 51% salt concentration 484 hours 352C MIL-STD-202, Method 101 Condition B. |
| 12. High temperature | Contact resistance: 100 mmax. | Subject product to 852C for 96 hours continuously. MIL-STD-202, Method 108. |
| 13. VSWR | 1.3max. at 0.1GHz~3GHz; 1.5max. at 3GHz~6GHz | Measure the VSWR as shown by the network, analyzer Frequency:100MHz~6GHz |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!