Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Interface | 内针 |
| RF Series | IPEX |
| Connector Type | 板端 |
| Operating Temperature | -40℃~+90℃ |
| Frequency | 6GHz |
| Impedance | 50Ω |
| Interface Diameter | 1.5mm |
| Description | Connector Receptacle IPEX Male Pin 50Ω Surface Mount,1.7x1.7mm |
| Mfr. Part # | A-IPEX5-0.57A |
| Package | SMD |
| Model Number | A-IPEX5-0.57A |
View Detail Information
Explore similar products
Brass gold plated communication assembly with insulator pin pins and rear plug
Professional grade kinghelm KH-MMCX-K510-Z connector cable suitable for
Crimp Non Solder TNC Male Connector L com EZ 600 TM X LC for Laboratory and
High Voltage 50 Ohm Male Clamp Coaxial Connector L-com ANM-2602 with Brass
Product Specification
| Number of Ports | 1 | Interface | 内针 |
| RF Series | IPEX | Connector Type | 板端 |
| Operating Temperature | -40℃~+90℃ | Frequency | 6GHz |
| Impedance | 50Ω | Interface Diameter | 1.5mm |
| Description | Connector Receptacle IPEX Male Pin 50Ω Surface Mount,1.7x1.7mm | Mfr. Part # | A-IPEX5-0.57A |
| Package | SMD | Model Number | A-IPEX5-0.57A |
This specification covers performance, tests, and quality requirements for the RF 1.0H CONNECTOR, specifically the 5th generation end plate (A-IPEX5-0.57A). It details electrical, mechanical, and environmental characteristics essential for its application.
| Category | Item | Specification | Test Procedure/Conditions |
| Ratings | Voltage Rating | 60VAC | |
| Nominal Characteristic Impedance | 50 | ||
| Frequency | DC 0.1~6GHz | ||
| VSWR | PLUG: 1.3 Max. (DC 0.1~3GHz), 1.5 Max. (3~6GHz) Receptacle: 1.3 Max. (DC 0.1~3GHz), 1.4 Max. (3~6GHz) | ||
| Service Temperature | -40 to 90 (233~363K) | ||
| Electrical Performance | Low Level Contact Resistance | Initial: 20m Max. Final: 40m Max. | Mated connector, 20 mV Max. Open circuit at 10 mA Max. MIL-STD-202, Method 307 |
| Insulation Resistance | Initial: 500 M Min. Final: 100 M Min. | 100V DC for 1 minute. Test between adjacent circuits and contact. MIL-STD-202, Method 302 | |
| Dielectric Withstanding Voltage | No creeping discharge or flash over shall occur. Current leakage: 2mA Max. | 200V AC for 1 minute. Test between adjacent circuits and contact. MIL-STD-202 Method 301 | |
| VSWR | Plug: 1.3 Max. at 0.1~3GHz, 1.5 Max. at 3~6GHz | Frequency: 100M~6GHz. Measured by network analyzer. | |
| Receptacle: 1.3 Max. at 0.1~3GHz, 1.4 Max. at 3~6GHz | |||
| Mechanical Performance | Un-mating Force | Total: Initial 5N Min., after 30 cycles 3N Min. Inner Contact: Initial 0.15N Min., after 30 cycles 0.1N Min. | Push-on/pull-off speed 253mm/min. |
| Crimp Strength | 7N MIN | Tensile strength machine at 253mm/min. | |
| Durability | Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. | Mate and un-mate 30 cycles at 253mm/min. | |
| Environmental Performance | Salt Spray | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. | MIL-STD-202, Method 101, Condition B. 352, 51% salt water, 48 hours. |
| Temperature Life | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. Insulation Resistance: Initial 500M Min., after testing 100M Min. | 902, 96 hours. | |
| Thermal Shock | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. Insulation Resistance: Initial 500M Min., after testing 100M Min. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown. | 5 cycles: -40/30min, 5~35/5min max, 90/30min, 5~35/5min max. | |
| Humidity | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. Insulation Resistance: Initial 500M Min., after testing 100M Min. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown. | MIL-STD-202, Method 103, Condition B. 402, 90~95% RH, 96 hours. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!