Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -45℃~+85℃ |
| Locking Feature | 翻盖式 |
| Number of Contacts | 40P |
| Pitch | 0.5mm |
| Current Rating | 500mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 铜合金 |
| Description | FFC/FPC Connector 40 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle |
| Mfr. Part # | AFC01-S40FCA-00 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | AFC01-S40FCA-00 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -45℃~+85℃ | Locking Feature | 翻盖式 |
| Number of Contacts | 40P | Pitch | 0.5mm |
| Current Rating | 500mA | Voltage Rating (Max) | 50V |
| Contact Type | 下接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 铜合金 | Description | FFC/FPC Connector 40 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle |
| Mfr. Part # | AFC01-S40FCA-00 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | AFC01-S40FCA-00 |
The Jushuo AFC01-S FFC/FPC connector is a 0.5mm pitch, series locking flexible flat cable connector designed for reliable electrical connections. It features a flip-up actuator for easy cable insertion and removal, making it suitable for applications requiring frequent connection and disconnection. This connector is engineered to meet stringent electrical, mechanical, and environmental performance standards, ensuring durability and consistent performance in various operating conditions.
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | |
| Ambient Temperature Range | -45 to +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at a speed of 253mm/minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration Resistance | Discontinuity 1 ms MAX. Appearance: No Damage. Contact Resistance 60 m MAX. | Amplitude: 1.5mm P-P. Sweep time: 10-55-10Hz/min. Duration: 2 hours in each X, Y, Z axes (DC 1mA energized). |
| Shock Resistance | Discontinuity 1 ms MAX. Appearance: No Damage. | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA energized). |
| Heat Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity Resistance | Insulation Resistance 20 M MIN. Appearance: No Damage. Contact Resistance 60 m MAX. | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. Measurement within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Contact Resistance 60 m MAX. Appearance: No Damage. | 5 cycles of: 30 minutes at -452, 10-15 minutes at room temp/humidity, 30 minutes at 852, 10-15 minutes at room temp/humidity. |
| Salt Spray Resistance | Contact Resistance 60 m MAX. Appearance: No Damage, Corrosion. | 484 hours exposure to a salt spray from a 51% solution at 352. Post-test wash with room temperature water and dry. |
| SO2 Gas Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting 95% of area. | Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation. | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. |
| Product Models | ||
| Part Number | Description | Packaging |
| AFC01-S**FCC-00 | FFC/FPC Connector (Series Locking) | Tube Packaging (for small quantities) |
| AFC01-S**FCA-00 | FFC/FPC Connector (Series Locking) | Reel Packaging (recommended for bulk orders) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!