Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -45℃~+85℃ |
| Locking Feature | 翻盖式 |
| Number of Contacts | 10P |
| Pitch | 0.5mm |
| Current Rating | 500mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 铜合金 |
| Description | FFC/FPC Connector 10 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle |
| Mfr. Part # | AFC01-S10FCA-00 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | AFC01-S10FCA-00 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -45℃~+85℃ | Locking Feature | 翻盖式 |
| Number of Contacts | 10P | Pitch | 0.5mm |
| Current Rating | 500mA | Voltage Rating (Max) | 50V |
| Contact Type | 下接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 铜合金 | Description | FFC/FPC Connector 10 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle |
| Mfr. Part # | AFC01-S10FCA-00 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | AFC01-S10FCA-00 |
The Jushuo AFC01-S FFC/FPC connector is a 0.5mm pitch connector designed for flexible flat cable applications. Featuring a flip-up actuator for secure connection, this series locking connector is suitable for various electronic devices requiring reliable signal transmission. It is manufactured by Shenzhen Jushuo Electronics Co., Ltd. and is available in tape-and-reel packaging for mass production.
| Item | Specification / Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | |
| Ambient Temperature Range | -45 to +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, 200V AC (virtual value) for 1 minute between adjacent terminals or ground |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Mate 0.3mm thick FFC, speed 253mm/min |
| Withdrawal Force | 0.49*n (N) MIN | Mate 0.3mm thick FFC, speed 253mm/min |
| Terminal/Housing Retention Force | 3.92N MIN | Pull terminal parallel at speed of 253mm/min |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | 20 cycles at < 10 cycles/min, no power |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498) |
| Vibration | Discontinuity 1 ms MAX, Appearance: No Damage | Amplitude: 1.5mm P-P, Frequency: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes, DC 1mA |
| Shock | Discontinuity 1 ms MAX, Appearance: No Damage | 490m/s {50G}, 3 strokes in each X,Y,Z axes, DC 1mA |
| Heat Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | 852, 96 hours, then return to room temp 1-2 hours |
| Cold Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | -402, 96 hours, then return to room temp 1-2 hours |
| Humidity | Insulation Resistance 20 M MIN, Appearance: No Damage | 402, 90-95% RH, 96 hours, tested within 0.5 hours after returning to room temp |
| Temperature Cycling | Contact Resistance 60 m MAX, Appearance: No Damage, Corrosion | 5 cycles: 30 min at -452, 30 min at 852, with 10-15 min at room temp between cycles |
| Salt Spray | Contact Resistance 60 m MAX, Appearance: No Damage | 484 hours exposure to 51% salt solution at 352, followed by washing and drying |
| SO2 Gas Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402 |
| NH3 Gas Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | 40 minutes exposure to NH3 gas from 28% Ammonia solution |
| Solderability | Solder Wetting 95% | Immersion in 2355 tin bath for 20.5 sec, 0.2mm from terminal tip |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Immersion in 2605 tin bath for 50.5 sec, 0.2mm from terminal tip |
| Product Shape, Dimensions and Materials | ||
| Main Body Material | LCP (Natural) UL 94V-0 | Refer to drawing |
| Housing Lock Material | LCP (Black) UL 94V-0 | Refer to drawing |
| Terminal Material | Phosphor Bronze | Refer to drawing |
| Contact Material | Phosphor Bronze | Refer to drawing |
| Plating | Gold Plated / Tinning (Metal Surface) | Refer to drawing |
| Part Numbers | AFC01-S**FCC-00 (Tube packaging), AFC01-S**FCA-00 (Tape & Reel packaging) | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!