Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -40℃~+80℃ |
| Number of Contacts | 51P |
| Pitch | 0.3mm |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.2mm |
| Contact Plating | 金 |
| Contact Material | 铜合金 |
| Description | FFC/FPC Connector 51 Position 0.3mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃ |
| Mfr. Part # | 8.03A0.051200 |
| Package | SMD,P=0.3mm,Surface Mount,Right Angle |
| Model Number | 8.03A0.051200 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -40℃~+80℃ | Number of Contacts | 51P |
| Pitch | 0.3mm | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.2mm | Contact Plating | 金 |
| Contact Material | 铜合金 | Description | FFC/FPC Connector 51 Position 0.3mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃ |
| Mfr. Part # | 8.03A0.051200 | Package | SMD,P=0.3mm,Surface Mount,Right Angle |
| Model Number | 8.03A0.051200 |
0.3mm pitch dual contact side connector (H=0.9mm) with back lock mechanism, designed for 0.2mm thick FFC/FPC cables (9-61 pin). This connector features dual contact for enhanced reliability and a back lock design for secure mating. It is suitable for SMT processes.
| Spec | Value | Description |
| Series | 8.03A | 0.3mm FFC/FPC dual contact side connector (H=0.9mm) |
| Pitch | 0.3mm | |
| Height (H) | 0.9mm | |
| Applicable FFC/FPC Thickness | 0.2mm 0.02mm | |
| Pin Positions | See drawing | |
| Contact Type | Dual contact | |
| Termination Type | SMT | |
| Coplanarity | 0.10mm MAX | |
| Operation Temperature | -40 ~ +85 | Without ice or dew |
| Operation Humidity | 20-85RH | |
| Storage Temperature | -10 ~ +50 | Without ice or dew |
| Storage Humidity | 20 ~ 85%RH | |
| Rating Voltage | 30V (AC/DC) | |
| Rating Current | 0.2A / PIN | At ambient temperature 20 |
| Housing Material | LCP Nature Color | UL 94V-0 |
| Cover Material | PA/PPS Black | UL 94V-0 |
| Terminal Material | Copper Alloy | |
| Stator Material | Copper Alloy | |
| Plating Spec. | Gold plating 1~3u" | Contact area and solder area, see drawing |
| Contact Resistance | 100m Max | Mate applicable FPC, measure by dry circuit, 20mV Max. DC, 1mA. |
| Insulation Resistance | 50M MIN | Apply 100V DC 1Minutes between adjacent terminals. |
| Dielectric Strength | No Damage/Shorting | Apply 100V AC 1Minutes between adjacent terminals. |
| Retention Force of single Pin | 0.2N / PIN MIN | Apply axial pull out force at the rate of 25~100mm/Min. |
| Retention force of GND Pin | 0.3N / PIN MIN | Apply axial pull out force at the rate of 25~100mm/Min. |
| Retention force of FFC/FPC | 0.2N Min/Pin | Insert FFC into connector, apply axial pull out force at the rate of 20~100mm/Min. (PIN X 0.2N Min) |
| Shock Test | 1sec Max. of discontinuity ok, Contact resistance 100m MAX, No Damage | Acceleration 490m/s, lasting 11ms, 3 times for each of 6 directions. |
| Vibration Test | 1sec Max. of discontinuity ok, Contact resistance 100m MAX, No Damage | Amplitude: 1.52mm, Frequency: 10~55~10Hz in 1 minute, X/Y/Z directions for 2 hours each. |
| Durability (Lock/Dis-lock) | 100m MAX of Contact resistance ok, No Damage | 20 times with loading. |
| Heat Resistance Test | 1sec Max. of discontinuity ok, Contact resistance 100m MAX, No damage, Retention force 0.2N/Pin | Expose to 852 for 96H, conditioned at ambient for 1H. |
| Humidity Test | 1sec Max. of discontinuity ok, Contact Resistance: 100m Max, Insulation Resistance: 50 M Min, Dielectric: No damage, Shorting, Visual ok | Expose to 403, 90~95% RH for 96H, conditioned at ambient for 1H. |
| High/Low Temperature Cycle Test | 1sec Max. of discontinuity ok, Contact Resistance: 100 m Max, Visual ok, Retention force 0.2N/Pin | 5 cycles based on table, conditioned at ambient for 1H. |
| Salt Spray Test (Gold Plating) | No Corrosion | Expose to 5% salt water density at 351 for 24H. |
| Solderability | Soldering tail easy wetting, Tin cover > 90% | Dip soldering tail into Tin oven at 2455 for 3sec. |
| Resistance to Soldering Heat | Contact resistance 100m Max., no damage, Retention force 0.2N/Pin | Preheat: 150~180 60~120s, Peak temp: 2505, over 230 last 305s. |
| Recommended Soldering Profile | Refer to document | Preheat: 150~180 60~120s, Peak temp: 2505, over 225 last 30 5s. Lock cover must be opened. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!