Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 24P |
| Pitch | 0.5mm |
| Current Rating | 500mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 单侧触点/垂直 |
| Mounting Type | 立贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 24 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃ |
| Mfr. Part # | HX FPC 0.5-24P LTH2.0 |
| Package | SMD,P=0.5mm |
| Model Number | HX FPC 0.5-24P LTH2.0 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 24P | Pitch | 0.5mm |
| Current Rating | 500mA | Voltage Rating (Max) | 50V |
| Contact Type | 单侧触点/垂直 | Mounting Type | 立贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 24 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃ |
| Mfr. Part # | HX FPC 0.5-24P LTH2.0 | Package | SMD,P=0.5mm |
| Model Number | HX FPC 0.5-24P LTH2.0 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
| Item | Specification | Requirement |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| Performance | ||
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (for 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under energized state; Vibration along XYZ three directions; Amplitude: 1.5mm; Sweep time: 10-55-10Hz/minute; Duration: 2 hours in each X.Y.Z. axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under energized state; 6 directions perpendicular to the mating axis; Impact at 490m/s2{50G}; 3 times each. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; Place in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; Place in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; Place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 48 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Dip terminal tip 0.2mm from the reference plane into a 2455 tin bath for 20.5 sec. | Solder Wetting: 95% area |
| Resistance to Soldering Heat | Subjected to 2455 hot air for 305 sec, at least 5 times. | Appearance: No Damage, Deformation |
| Product Shape, Dimensions and Materials | ||
| Name | Material | |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal Sit uip | Phosphor Bronze | |
| Contact | Phosphor Bronze | Metal surface plated with tin |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!