Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 10P |
| Pitch | 0.5mm |
| Current Rating | 500mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 单侧触点/垂直 |
| Mounting Type | 立贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 10 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃ |
| Mfr. Part # | HX FPC 0.5-10P LTH2.0 |
| Package | SMD,P=0.5mm |
| Model Number | HX FPC 0.5-10P LTH2.0 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 10P | Pitch | 0.5mm |
| Current Rating | 500mA | Voltage Rating (Max) | 50V |
| Contact Type | 单侧触点/垂直 | Mounting Type | 立贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 10 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃ |
| Mfr. Part # | HX FPC 0.5-10P LTH2.0 | Package | SMD,P=0.5mm |
| Model Number | HX FPC 0.5-10P LTH2.0 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors (HX FPC 0.5-10P LTH2.0) from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
| Item | Specification/Requirement | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (effective value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. No power applied. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. Appearance: No Damage. | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes. DC 1mA applied. |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX. | 490m/s {50G}, 3 strokes in each X.Y.Z. axes. DC 1mA applied. |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | 852, 96 hours. Mate applicable FPC/FFC. Return to room temperature for 1-2 hours before measurement. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | -402, 96 hours. Mate applicable FPC/FFC. Return to room temperature for 1-2 hours before measurement. |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MAX; Insulation Resistance: 20 M MIN; Dielectric Strength: Must meet 4.1.3 | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Mate applicable FPC/FFC. Measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. Mate applicable FPC/FFC. |
| Salt Spray | Appearance: No Damage, Corrosion; Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from the 51% solution at 352. Mate applicable FPC/FFC. Wash with room temperature water and dry after test. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. Mate applicable FPC/FFC. |
| NH3 Gas | Appearance: No Damage; Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. Mate applicable FPC/FFC. |
| Solderability | Solder Wetting: 95% or more coverage. | Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation. | Soldering Time: 305 sec; Soldering Temperature: 2455; At least 5 times. |
| Product Shape, Dimensions and Materials | ||
| Name | Material | Remark |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze | Metal surface plated with tin |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!