Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -40℃~+80℃ |
| Number of Contacts | 8P |
| Pitch | 0.5mm |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 金 |
| Contact Material | 铜合金 |
| Description | FFC/FPC Connector 8 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃ |
| Mfr. Part # | 8.01A0.008200 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | 8.01A0.008200 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -40℃~+80℃ | Number of Contacts | 8P |
| Pitch | 0.5mm | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 金 |
| Contact Material | 铜合金 | Description | FFC/FPC Connector 8 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃ |
| Mfr. Part # | 8.01A0.008200 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | 8.01A0.008200 |
This product is a 0.5mm pitch dual-contact side connector designed for FFC/FPC cables with a thickness of 0.3mm. It features a rear-locking mechanism and a height of 2.0mm, suitable for applications requiring reliable connections in a compact form factor. The connector is designed for SMT soldering and offers double-sided contact for enhanced electrical performance. It is crucial to ensure the lock cover is opened before SMT soldering or FPC insertion to prevent damage and ensure proper contact.
| Spec | Description | Value |
| Series | 0.5mm FFC/FPC Dual Contact Side Connector | 8.01A |
| Pitch | 0.5mm | |
| Height (H) | 2.0mm | |
| Applicable FPC Thickness | 0.3mm 0.02mm | |
| Contact Type | Dual sides contact | |
| Locking Mechanism | Rear-locking | |
| Soldering Type | SMT | |
| Housing Material | LCP Nature Color (UL 94V-0) | |
| Cover Material | LCP Black (UL 94V-0) | |
| Terminal Material | Copper Alloy | |
| Stator Material | Copper Alloy | |
| Plating Specification | Contact area and solder area gold plating 1~3u | |
| Coplanarity | 0.10mm MAX | |
| Operation Temperature | -40 ~ +85 | |
| Operation Humidity | 20-85RH | |
| Storage Temperature | -10 ~ +50 | |
| Storage Humidity | 20 ~ 85%RH | |
| Rating Voltage | 50V (AC/DC) at 20 | |
| Rating Current | 0.5A / PIN at 20 | |
| Contact Resistance | 30m Max | |
| Insulation Resistance | 500M MIN | |
| Dielectric Strength | 250V AC 1Minute between adjacent terminals (No Damage/Shorting) | |
| Retention Force of single Pin | 0.2N / PIN MIN | |
| Retention Force of GND Pin | 0.3N / PIN MIN | |
| Retention Force of FFC/FPC | 0.3N Min/Pin (PIN Count X 0.3N Min) | |
| Shock Test | 490m/s, 11ms, 3 times/6 directions | 1sec Max. discontinuity ok, 50m MAX Contact resistance ok, No Damage |
| Vibration Test | 1.52mm Amplitude, 10~55~10Hz Frequency, 2 hours/axis (X/Y/Z) | 50m MAX Contact resistance ok, No Damage |
| Durability (Lock/Dis-lock) | 20 times | 50m MAX Contact resistance ok, No Damage |
| Heat Resistance Test | 852 for 96H | 1sec Max. discontinuity ok, 50m MAX Contact resistance ok, No damage, Retention force 0.3N/Pin |
| Humidity Test | 403, 90~95% RH for 96H | 1sec Max. discontinuity ok, Contact Resistance: 50m Max, Insulation Resistance: 500 M Min, Dielectric: No damage, Shorting, Visual ok |
| High/Low Temperature Cycle Test | 5 cycles | 1sec Max. discontinuity ok, Contact Resistance: 50 m Max, Visual ok, Retention force 0.3N/Pin |
| Salt Spray Test (Gold Plating) | 351, 5% salt water density, 48H | No Corrosion |
| Solderability Test | Dip soldering tail into Tin oven, 2455, 3sec | Soldering tail shall be easy wetting by melted tin, Tin shall cover over 90% of dipping area |
| Resistance to Soldering Heat | Preheating: 150180 60~120Sec., Peak temp: 2505, over 230 last 305Sec. | Contact resistance 50m Max., no damage, Retention force 0.3N/Pin |
| Recommended Soldering Profile | Preheating: 150180 60~120Sec., Peak temp: 2505, over 225 last 305Sec. (Lock cover shall be opened) | Reference only |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!