Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -40℃~+85℃ |
| Locking Feature | 无锁 |
| Number of Contacts | 10P |
| Pitch | 1.25mm |
| Current Rating | 1A |
| Voltage Rating (Max) | 125V |
| Contact Type | 单侧触点/垂直 |
| Mounting Type | 直插 |
| FFC, FCB Thickness | 0.3mm |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 10 Position 1.25mm Pitch Single-side Contact/Vertical Through Hole |
| Mfr. Part # | AF125-S10HCC-00 |
| Package | Through Hole,P=1.25mm |
| Model Number | AF125-S10HCC-00 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -40℃~+85℃ | Locking Feature | 无锁 |
| Number of Contacts | 10P | Pitch | 1.25mm |
| Current Rating | 1A | Voltage Rating (Max) | 125V |
| Contact Type | 单侧触点/垂直 | Mounting Type | 直插 |
| FFC, FCB Thickness | 0.3mm | Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 10 Position 1.25mm Pitch Single-side Contact/Vertical Through Hole | Mfr. Part # | AF125-S10HCC-00 |
| Package | Through Hole,P=1.25mm | Model Number | AF125-S10HCC-00 |
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model. These connectors are designed for applications requiring a 1.25mm pitch flexible flat cable connection. They offer a rated voltage of 125V and a rated current of 1.0A (AC/DC), with an operating temperature range of -40 to +85.
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) | 1.0A [AC(rms)/DC] | |
| Ambient Temperature Range | -40 +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal /Housing Retention Force | 3.92 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise (at Rated Current) | 30 MAX | Carrying rated current load (UL 498). |
| Vibration (Discontinuity) | 1 ms MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes (DC 1mA applied). |
| Shock (Discontinuity) | 1 ms MAX | 490m/s {50G}, 3 strokes in each X,Y,Z axes (DC 1mA applied). |
| Heat Resistance (Contact Resistance) | 60 m MAX | 852 air, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance (Contact Resistance) | 60 m MAX | -402 air, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity (Insulation Resistance) | 20 M MIN | 402, 90-95% RH, 96 hours, then measured within 0.5 hours at room temperature. |
| Temperature Cycling (Contact Resistance) | 60 m MAX | 5 cycles of: -553 (30 min) -> Room Temp (10-15 min) -> 852 (30 min) -> Room Temp (10-15 min). |
| Salt Spray (Contact Resistance) | 60 m MAX | 484 hours exposure to 51% salt solution at 352. |
| SO2 Gas (Contact Resistance) | 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas (Contact Resistance) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability (Solder Wetting) | 95% or more coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | No Damage, Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!