Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 抽屉式 |
| Number of Contacts | 16P |
| Pitch | 1mm |
| Current Rating | 400mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 上接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 16 Position 1mm Pitch Top Contact Surface Mount, Right Angle |
| Mfr. Part # | AFA07-S16ECC-00 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | AFA07-S16ECC-00 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 抽屉式 |
| Number of Contacts | 16P | Pitch | 1mm |
| Current Rating | 400mA | Voltage Rating (Max) | 50V |
| Contact Type | 上接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 16 Position 1mm Pitch Top Contact Surface Mount, Right Angle |
| Mfr. Part # | AFA07-S16ECC-00 | Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | AFA07-S16ECC-00 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors, specifically the 1.0mm pitch drawer-type 16-pin connector. Designed for reliable connection of flexible flat cables, these connectors are suitable for applications requiring a compact and secure interface. They are rated for a maximum voltage of 50V AC/DC and a maximum current of 0.4A, operating within an ambient temperature range of -25 to +85.
| Item | Specification | Requirement |
|---|---|---|
| 1. Scope | ||
| Applicable Connector | 0.5mm Pitch FPC/FFC Connectors (Series Locking) | 16-PIN Top/16-PIN |
| 3. Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.4A | |
| Ambient Temperature Range | -25+85 | |
| 4. Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (for 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN |
| 4.3 Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA in energized state; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X, Y, Z axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA in energized state; 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | 852, 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | -402, 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; then measure within 0.5 hours at room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 484 hours exposure to a salt spray from 51% solution at 352. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip | Solder Wetting: 95% coverage area |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip | Appearance: No Damage, Deformation |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!