Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 抽屉式 |
| Number of Contacts | 20P |
| Pitch | 0.5mm |
| Current Rating | 400mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 上接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 20 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | HX0.5-20P CTSJ-H2.0 119 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX0.5-20P CTSJ-H2.0 119 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 抽屉式 |
| Number of Contacts | 20P | Pitch | 0.5mm |
| Current Rating | 400mA | Voltage Rating (Max) | 50V |
| Contact Type | 上接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 20 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | HX0.5-20P CTSJ-H2.0 119 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX0.5-20P CTSJ-H2.0 119 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance.
| Item | Specification | Test Condition | Requirement |
| Ratings | |||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V | |
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | DC 1mA energized; vibrate along XYZ axes, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Appearance: No Damage |
| Shock | DC 1mA energized; 490m/s2{50G} shock, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX | |
| Heat Resistance | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Cold Resistance | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Humidity | Place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours at room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at normal temperature and humidity between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip | Solder Wetting: 95% of wetting area | |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 At least 5 times. | Appearance: No Damage, Deformation | |
| Product Shape, Dimensions and Materials | |||
| Main Body | LCP | UL 94V-0 | |
| Housing Lock | LCP | UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated tin | |
| Contact | Phosphor Bronze | Metal surface plated tin | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!