Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 翻盖式 |
| Number of Contacts | 6P |
| Pitch | 0.5mm |
| Current Rating | 500mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 双侧触点/上下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 金 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 6 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | HX 0.5-6PINQFHY-H2.0 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX 0.5-6PINQFHY-H2.0 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 翻盖式 |
| Number of Contacts | 6P | Pitch | 0.5mm |
| Current Rating | 500mA | Voltage Rating (Max) | 50V |
| Contact Type | 双侧触点/上下接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 金 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 6 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | HX 0.5-6PINQFHY-H2.0 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX 0.5-6PINQFHY-H2.0 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors (Series Locking). These connectors are designed for flexible flat cable applications, offering a reliable locking mechanism.
| Item | Specification | Requirement |
| 3. RATINGS | ||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MMIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under energized state; Vibration along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under energized state; 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; Placed in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; Placed in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; Placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 24 4 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | Solder Wetting: 95% or more |
| Resistance to Soldering heat | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times. | No Damage, Deformation |
| 5. PRODUCT SHAPE, DIMENSIONS AND MATERIALS | ||
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze (Surface plated with gold) | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!